Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Ease of use and comfort Automatic air conditioning

49Ease of use and comfort3►Do not cover the sunshine sensor located on the dashboard; this sensor is used to regulate the automatic air conditioning system.►Operate the air conditioning system for at least 5 to 10 minutes once or twice a month to keep it in good working order.►If the system does not produce cold air, switch it off and contact a PEUGEOT dealer or a qualified workshop.When towing a large load on a steep gradient in high temperatures, switching off the air conditioning increases the available engine power, enhancing the towing capacity.Avoid driving for too long with the ventilation off or with prolonged operation of interior air recirculation. Risk of misting and deterioration of the air quality!If the interior temperature is very high after the vehicle has stood for a long time in the sunshine, air the passenger compartment for a few moments.Put the air flow control at a setting high enough to quickly change the air in the passenger compartment.Condensation created by the air conditioning results in a discharge of water underneath the vehicle. This is perfectly normal.Servicing the ventilation and air conditioning system►Ensure that the passenger compartment filter is in good condition and have the filter elements replaced regularly.We recommend using a composite passenger compartment filter. Its specific active additive helps protect against polluting gases and bad smells.►To ensure correct operation of the air conditioning system, have it checked according to the recommendations in the Manufacturer’s service schedule.Stop & StartThe heating and air conditioning systems only operate when the engine is running.Temporarily deactivate the Stop & Start system to maintain a comfortable temperature in the passenger compartment.For more information on the Stop & Startsystem, refer to the corresponding section.ECO driving modeSelecting this mode reduces electrical energy consumption, but restricts the performance of the heating and air conditioning systems, although it does not deactivate them.Automatic air conditioningThis system automatically controls the activation of the air conditioning system, regulating the temperature, air flow and air distribution inside the passenger compartment.This system works with the engine running, but access to the ventilation and its controls remains possible with the ignition on.Press the Climate application button to display the system controls page.
50Ease of use and comfortWith Touch screen 10" & Bluetooth Radio & TelephoneWith PEUGEOT i-Connect Advanced- PEUGEOT i-Connect1.Temperature adjustment2.Air flow adjustment3.Air distribution adjustment4.Air conditioning on/off5.Automatic air conditioning on/off and setting (AUTO SOFT/AUTO NORMAL/AUTO FAST)6.Temperature pre-conditioning (depending on version)7.Interior air recirculation8.Switching the system off9.Maximum air conditioning10.Front demisting/defrosting11.Rear screen demisting/defrosting12.Access to the secondary page13.Selection of settings for the Automatic air conditioning (AUTO SOFT/AUTO NORMAL/AUTO FAST)Temperature adjustmentThe driver and front passenger can each choose their own temperature setting.The value indicated corresponds to a level of comfort and not to a precise temperature.►Press one of the buttons 1 (+ or -) or drag vertically to increase or decrease the value.It is possible to go beyond the minimum and maximum values by selecting respectively Lowor High.It is recommended that you avoid a difference of more than 3°C in the settings for left and right.Automatic air conditioningThis automatic mode ensures optimum management of the passenger compartment temperature, air flow and air distribution, based on the selected comfort level.►Press button 5-AUTO to activate/deactivate the automatic mode of the air conditioning system.The indicator lamp in the button lights up when the air conditioning system is operating automatically.The intensity of the automatic air conditioning is modulated by choosing one of the following settings:–AUTO SOFT: provides soft and quiet operation by limiting air flow.–AUTO NORMAL: offers the best compromise between a comfortable temperature and quiet operation (default setting).–AUTO FAST: provides dynamic and efficient air distribution.With Audio System with Touch ScreenTo change the current setting (shown by the corresponding indicator lamp), press button13repeatedly until the desired setting is displayed.To ensure passenger comfort in the rear seats, favour "Normal" and "Fast" settings.This setting is associated with automatic mode only. However, on deactivation ofAUTO mode, the indicator lamp for the most recently selected setting remains on.Changing the setting does not reactivate AUTOmode if it was deactivated.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectTo change the AUTO mode, press button 5-AUTO successively.To ensure passenger comfort in the rear seats, favour settings AUTO NORMAL and AUTO FAST.In cold weather with the engine cold, the air flow is increased gradually until the comfort setting has been reached, in order to
51Ease of use and comfort3limit the delivery of cold air into the passenger compartment.On entering the vehicle, if the interior temperature is much colder or warmer than the comfort setting requested, there is no need to alter the value displayed to more quickly reach the required level of comfort. The system automatically corrects the temperature difference as quickly as possible.Automatic air conditioning manual settingsIt is possible to manually adjust one or more of these functions, while the system retains automatic control of the other functions:–air flow.–air distribution.The indicator lamp in the "AUTO” button goes out if a setting is changed.►Press button 5-AUTO again to reactivate automatic air conditioning.Adjusting the air flow►Press one of the buttons 2 (fan) or drag horizontally to increase or decrease air flow.It is also possible to directly press one of the values.Switching off the air conditioning systemWhen the air flow is reduced to a minimum, ventilation stops.“OFF" is displayed alongside the fan.Adjusting the air distribution►Press the buttons 3 to adjust the air flow distribution inside the passenger compartment.Windscreen and side windows Central and side air vents Footwells A symbol is activated to display the presence of blown air in the direction indicated.It is possible to activate all three buttons simultaneously, for uniform distribution throughout the passenger compartment.Air conditioning on/offThe air conditioning system is designed to operate effectively in all seasons, with the windows closed:–It lowers the temperature in summer.–It increase the effectiveness of the demisting, in winter, above 3°C.►Press button 4-A/C to switch the air conditioning on/off.When the function is switched on, "A/C" changes colour.Air conditioning does not operate when the air flow is deactivated.To obtain cool air more quickly, enable interior air recirculation for a brief period. Then return to the intake of exterior air.Switching off the air conditioning may result in some discomfort (humidity or misting).Maximum air conditioningThis function automatically adjusts the temperature setting to the lowest possible, the air distribution towards the central and side air vents, the air flow to maximum and, if necessary, activates interior air recirculation.►Press this button to activate/deactivate the function (confirmed by the illumination/extinction of the indicator lamp).Once the function is deactivated, the system returns to the previous settings.Switching off the air conditioning system►Press button8-OFF.Its indicator lamp lights up and all the other indicator lamps of the air conditioning system go off.This action deactivates all of the functions of the air conditioning system.The temperature is no longer regulated. A slight flow of air can still be felt, due to the forward movement of the vehicle.
52Ease of use and comfortInterior air recirculationThe intake of exterior air prevents the formation of mist on the windscreen and side windows.Recirculating the interior air isolates the passenger compartment from outside odours and fumes and allows the desired passenger compartment temperature to be achieved more rapidly.►Press this button to activate/deactivate the function (confirmed by the illumination/extinction of the indicator lamp).This function is activated automatically when reverse gear is engaged.Maximum air conditioningThis function automatically adjusts the temperature setting to the lowest possible, the air distribution towards the central and side air vents, the air flow to maximum and, if necessary, activates interior air recirculation.►Press this button to activate/deactivate the function (confirmed by the illumination/extinction of the indicator lamp).Once the function is deactivated, the system returns to the previous settings.Switching off the thermal comfort system►Press this button.Its indicator lamp comes on and all of the other indicator lamps for the system go off.This action deactivates all of the functions of the air conditioning system.The temperature is no longer regulated. A slight flow of air can still be felt, due to the forward movement of the vehicle.Front demisting/defrostingAutomatic Visibility programmeThis mode allows the windscreen and side windows to be demisted or defrosted as quickly as possible.►Press this button to activate/deactivate the mode (confirmed by the illumination/extinction of theindicator lamp).The programme automatically manages the air conditioning (depending on version), air flow and air intake, and provides optimum distribution towards the windscreen and side windows.It is possible to manually change the air flow without deactivating the automatic Visibility programme.With Stop & Start, when demisting has been activated, STOP mode is not available.In wintry conditions, before moving off, it is essential to remove any snow or ice from the windscreen around the camera.Otherwise, the operation of the equipment using the camera may be affected.Rear screen demisting/defrostingThis demisting/de-icing only works with the engine running.Depending on version, it also demists/de-ices the door mirrors.►Press this button to activate/deactivate the function (confirmed by the indicator lamp coming on/switching off).Demisting/defrosting switches off automatically to prevent an excessive consumption of electrical current.Switch off demisting/defrosting when you no longer need it; reducing electrical consumption in turn decreases energy consumption.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131