Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Driving Starting/Switching off the electric motor

95Driving6►Keep the pedal fully depressed and do not press the "START/STOP" button again until the engine is running.In all circumstances, if one of the starting conditions is not met, a message is displayed.In some circumstances, a message indicates that it is necessary to turn the steering wheel while pressing the "START/STOP" button to assist unlocking of the steering column.Petrol enginesWith Petrol engines, after a cold start, pre-heating the catalytic converter can cause noticeable engine vibrations, for anything up to 2minutes (accelerated idle speed).If the engine stalls, release the clutch pedal and fully depress it again, the engine will restart automatically.Switching off►Immobilise the vehicle using the parking brake.►With a manual gearbox, ideally put the gear lever into neutral.►With an automatic gearbox, ideally select modeP orN.►Press the "START/STOP" button.In some circumstances, it is necessary to turn the steering wheel to lock the steering column.If the vehicle is not immobilised, the engine will not stop.With the engine off, the braking and steering assistance systems are also cut off - risk of loss of control of the vehicle!Never leave your vehicle with the electronic key still inside.Starting/Switching off the electric motorStartingThe drive selector must be in mode P.►Fully depress the brake pedal and briefly press the "START/STOP" button.►Keep your foot on the brake pedal until the READY indicator lamp comes on and an audible signal is emitted, indicating that the vehicle is ready to drive.►With your foot on the brake, press the "Unlock" button and select modeD/B or R.►Release the brake pedal, then accelerate.On starting, the instrument panel lights up and the power indicator needle or cursor moves to the "neutral" position. The steering column automatically unlocks (you may hear a sound and feel the steering wheel move).Switching off►Press the "START/STOP" button.Before exiting the vehicle, check that:–The drive selector is in mode P.–The READY indicator lamp is off.If the driver's door is opened while the required conditions for stopping are not satisfied, an audible signal is emitted, accompanied by the display of a warning message.Switching on the ignition without starting the engineWith the electronic key in the passenger compartment, pressing the "START/STOP" button, without depressing any of the pedals, allows the ignition to be switched on without starting the engine.►Press this button again to switch off the ignition and allow the vehicle to be locked.Key not detectedBack-up startingA back-up reader is fitted to the steering column, to enable the engine to be started if the system
96Drivingfails to detect the key in the recognition zone, or if the battery in the electronic key is flat.►Place and hold the remote control against the back-up reader.►With a manual gearbox, place the gear lever in neutral, then fully depress the clutch pedal.►With an automatic gearbox or a drive selector, select modeP, then depress the brake pedal.►Press the "START/STOP" button.The engine starts.Back-up switch-offIf the electronic key is not detected or is no longer in the recognition zone, a message appears in the instrument panel when closing a door or trying to switch off the engine.►To confirm the instruction to switch off the engine, press the "START/STOP" button for approximately 5seconds.In the event of a fault with the electronic key, contact a PEUGEOT dealer or a qualified workshop.Emergency switch-offIn case of emergency only, the engine can be switched off without conditions (even when driving).►Press the "START/STOP" button for about 5seconds.In this case, the steering column locks as soon as the vehicle stops.Manual parking brakeRelease►Pull the parking brake lever up slightly, press the release button, then lower the lever fully.When driving the vehicle, if this warning lamp and the STOP warning lamp come on, accompanied by an audible signal and the display of a message, this means that the parking brake is still applied or has not been fully released.Application►Pull the parking brake lever up to immobilise the vehicle.When parking on a slope, turn the wheels against the kerb, apply the parking brake, engage a gear and switch off the ignition.Electric parking brakeIn automatic mode, this system applies the parking brake when the engine is switched off and releases it when the vehicle moves off.At any time, with the engine running:
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131