Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Driving Shortcuts for driving aids

111Driving6When reverse gear is engaged, an audible signal (long beep) indicates that the sensors may be dirty.A front or rear impact to the vehicle can upset the sensors’ settings, which is not always detected by the system: distance measurements may be distorted.The sensors do not systematically detect obstacles that are too low (pavements, studs) or too thin (trees, posts, wire fences).Certain obstacles located in the sensors’ blind spots may not be detected or may no longer be detected during the manoeuvre.Certain materials (fabrics) absorb sound waves: pedestrians may not be detected.MaintenanceClean the bumpers and door mirrors and the field of vision of the cameras regularly.When washing your vehicle at high pressure, direct the spray from at least 30cm away from the radar, sensors and cameras.Mats/Pedal trimsThe use of mats or pedal trims not approved by PEUGEOT may interfere with the operation of the speed limiter or cruise control.To avoid any risk of jamming the pedals:–Ensure that the mat is secured correctly.–Never fit one mat on top of another.Units of speedEnsure that the units of speed displayed on the instrument panel (mph or km/h) are those for the country you are driving in.If this is not the case, when the vehicle is stationary, set the display to the required units of speed so that it complies with what is authorised locally.In case of doubt, contact a PEUGEOT dealer or a qualified workshop.Shortcuts for driving aidsWith PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectThe full list of available driving aids can be found in the Functions tab.Driving aids can be accessed directly to quickly activate/deactivate them.By default, driving aids are already stored in the Shortcuts tab (e.g.Stop & Start, Lane keeping assist).Other driving aids can be added or deleted from this tab.It is configured in the ADAS>Functionstouch screen application.►Press the button corresponding to the driving assistance concerned: •Full symbol: the function is added to the Shortcuts tab.•Empty symbol: the function is deleted from the Shortcuts tab.►Check the modification in the Shortcuts tab.►Press this button to access directly to the Shortcuts tab.Multiple deactivationIt is possible to deactivate several driver assistance functions simultaneously.This is done in two steps:–First of all, the selection of all the functions that you want to deactivate.–Secondly, the simultaneous deactivation of all these functions.Selection of functions►Press this button on the dashboard to display the ADAS tabs.►Select the Functions tab.►Press this button to display the list of available functions.►Select the functions to deactivate (e.g.Stop&Start, Lane Keeping Assist, Automatic Braking System (Active Safety Brake)).►Press this button to return to the previous page.
112DrivingThe functions to deactivate are saved in the system.Deactivation of these functions►Press and hold this button on the dashboard.All previously selected functions are deactivated until the vehicle is next restarted (confirmed by an audible signal).Road signs recognitionFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system displays the maximum speed authorised locally on the instrument panel, using:–Speed limit signs detected by the camera.–Speed limit information from the on-board navigation system’s mapping.–Speed limit information from the connected services.–Signs indicating a shared traffic zone detected by the camera.Sign detectedSuggested speed (calculated)Entry into a shared traffic zoneExample:WithoutPEUGEOT i-Connect Advanced10 mph or 20km/h (depending on the units on the instrument panel)With PEUGEOT i-Connect AdvancedDisplay of the speed in force in the country you are driving in.–Some supplementary traffic signs detected by the camera.Supplementary traffic sign detectedDisplay of the speed associated with the supplementary traffic signSpeed limit when rainingExamples:If the wiper control stalk is in the "intermittent wipe" or "automatic wipe" position (in order to activate the rain sensor):68 mph (110km/h) (for example)Speed limit when towingIf an approved towing device is fixed to the vehicle:56 mph (90km/h) (for example)Speed limit applicable over a certain distanceExample:43 mph (70km/h) (for example)
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131