Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Driving Parking sensors

136DrivingDeactivation/ ActivationBy default, the function is automatically activated at every engine start.With Touch screen 10" & Bluetooth Radio & TelephoneThe settings are changed via the Drivingtouch screen menu.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectThe settings are changed via the ADAStouch screen application.orDirect access to the Shortcuts for driving aids.Deactivation is confirmed by the illumination of this indicator lamp on the instrument panel.MalfunctionIn the event of a malfunction, this warning lamp lights up on the instrument panel, accompanied by the display of a message and an audible signal.Have it checked by a PEUGEOT dealer or a qualified workshop.This warning lamp lights up on the instrument panel with the message "Driving Assistance Sensor blind: Clean sensor, see User Manual" if the sensor is masked.This is a normal behavior, which does not request the support of a qualified workshop.In this case, stop the vehicle and verify if the front camera is covered by dirt, mud, sand, snow, ice or anything preventing the sensing.The system is operational again after the detection field has been cleaned.Parking sensorsFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system detects and signals the proximity of obstacles (e.g.pedestrian, vehicle, tree, barrier) using sensors located in the bumper.Rear parking sensorsSystem startup is available under the following conditions:–when reverse gear is engaged.–when the vehicle is moving backwards (e.g.downhill, in neutral).It is indicated by an audible confirmation signal and a display indication.If an obstacle is detected as soon as the reverse gear is engaged, an audible detection signal is given directly instead of the audible confirmation signal.If no audible signal is given, the display indication is not shown or a warning message appears, the system has a failure.Audible assistanceThe system signals the presence of obstacles which are both within the sensors’ detection zone and in the vehicle path defined by the direction of the steering wheel.Depending on version, in the example shown, only the obstacles present in the shaded area will be signalled by the audible assistance.The proximity information is given by an intermittent audible signal, the frequency of
137Driving6which increases as the vehicle approaches the obstacle.When the distance between the vehicle and the obstacle becomes less than about thirty centimetres, the audible signal becomes continuous.The sound emitted by the speaker (right or left) indicates the side on which the obstacle is located.The audible signal is automatically suspended when the vehicle is stationary for a few seconds.The audible signal is automatically restored when the vehicle is moving again or if the obstacle approaches the vehicle.Adjusting the audible detection signalPressing this button opens the window for adjusting the volume of the audible signal.Pressing this button mutes/unmutes the audible signal.Visual assistanceThis supplements the audible signal by displaying bars on the screen whose location represents the distance between the obstacle and the vehicle (white: more distant, orange: close, red: very close).When the obstacle is very close, the "Danger" symbol is displayed on the screen.Closing the system display windowPressing this button closes the system display window.This warning lamp flashes during obstacle detection on the instrument panel.Muting the audible assistance / Closing the visual assistanceIf the audible detection signal is muted or the system display window is closed by the driver during the obstacle detection, only the warning lamp continues to flash on the instrument panel.Front parking sensorsSupplementing the rear parking sensors, the front parking sensors are triggered when an obstacle is detected in front and the speed of the vehicle is below 6 mph (10km/h).Front parking sensor operation is suspended if the vehicle stops for more than three seconds in forward gear, if an obstacle is no longer detected or the vehicle speed exceeds 6mph (10km/h).The sound emitted by the speaker (front or rear) locates the obstacle relative to the vehicle, in front or behind it.Side parking sensorsUsing four additional sensors located on the sides of the bumpers, the system records the position of obstacles during the manoeuvre and indicates them when they are located alongside the vehicle.Only fixed obstacles are indicated correctly. Moving obstacles detected at the beginning of the manoeuvre may be indicated mistakenly, while moving obstacles that appear alongside the vehicle but were not previously recorded will not be indicated.Objects memorised during the manoeuvre will no longer be stored after switching off the ignition.Deactivation/Activation(Depending on country of sale)By default, the audible signal is automatically activated at each time the reverse gear is engaged.
138DrivingThe system cannot be deactivated. With Touch screen 10" & Bluetooth Radio & TelephoneYou can start the system manually and activate/deactivate the audible signal in the Driving touch screen menu.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectYou can start the system manually and activate/deactivate the audible signal in the ADAS touch screen application.The rear parking sensors are deactivated automatically if a trailer or bicycle carrier is connected to a towing device installed in accordance with the Manufacturer's recommendations.In this case, the outline of a trailer is displayed at the rear of the image of the vehicle.When starting the vehicle, the graphic and audible aids are only available after the touch screen has started up.Operating limitsIf the boot is heavily loaded, the vehicle may tilt, affecting distance measurements.In case of a gearbox failure, the system is not active, when the reverse gear is engaged.MalfunctionIn case of display or speakers malfunction, the system may be disturbed or unavailable.In the event of vehicle malfunction, the system may be deactivated.In the event of a malfunction, this warning lamp lights up on the instrument panel, accompanied by the display of a message and an audible signal (short beep).Have it checked by a PEUGEOT dealer or a qualified workshop.This warning lamp lights up on the instrument panel with the message "Parking Assistance Sensor blind: Clean sensor, see User Manual" if the sensor is masked.This is a normal behavior, which does not request the support of a qualified workshop.In this case, stop the vehicle and verify if the front and/or rear sensors are covered by dirt, mud, sand, snow, ice or anything preventing the sensing.The system is operational again after the detection field has been cleaned.Visiopark 1 - Visiopark 2With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectVisiopark 1For more information, refer to the General recommendations on the use of driving and manoeuvring aids.When reverse gear is engaged, with the engine running, this system displays views of the vehicle's close surroundings on the touch screen using a camera located at the rear of the vehicle.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131