Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Driving Hill start assist

105Driving6NormalTo restore the default settings.EcoTo reduce energy consumption by reducing the performance of the heating and air conditioning, without deactivating them.To reduce consumption of the traction battery's electrical energy by limiting engine torque.SportWith a manual gearbox: to obtain more dynamic driving with action on the power steering, accelerator and the possibility of displaying the vehicle’s dynamic settings on the instrument panel.With an automatic gearbox: to obtain more dynamic driving with action on the power steering, accelerator, gear changes and possibility of displaying the vehicle’s dynamic settings on the instrument panel.The selection of the Sport mode deactivates the Stop & Start function.ManualPermanent Manual mode with an automatic gearbox.This manual mode is accessed via the button Mof the push selector.To change gears manually using the control paddles on the steering wheel.For more information on Automatic gearbox (EAT8), refer to the corresponding section.Coasting modeDepending on version or engine, with an EAT8 gearbox and the gear selector in mode D, except inSportmode, gradually and fully releasing the accelerator pedal allows free-wheeling which can save fuel.A drop in engine speed is normal (rev counter at idle, drop in engine noise).For electric versionsEach time the ignition is switched on, Normalmode is selected by default.NormalThis optimises the driving range and dynamic performance.To obtain maximum torque and power, depress the accelerator pedal fully.EcoOptimises energy consumption, by reducing the output of the heating and air conditioning (without actually deactivating them) and limiting both motor torque and power.SportEnables more dynamic driving, acting on the power steering, accelerator and gear changes with a drive selector and the possibility of displaying the vehicle’s dynamic settings on the instrument panel.Hill start assistThis system keeps the vehicle briefly stationary (for approximately 2seconds) when making a hill start, while you transfer your foot from the brake pedal to the accelerator pedal.The system is only active when:–The vehicle is completely stationary, with your foot on the brake pedal.–Certain slope conditions are met.–The driver’s door is closed.Do not leave the vehicle while it is being held temporarily by hill start assist.If someone needs to get out of the vehicle with the engine running, apply the parking brake manually. Then check that the parking brake indicator lamp and the P indicator lamp in the electric parking brake control are on fixed.The hill start assist function cannot be deactivated. However, using the parking brake to immobilise the vehicle interrupts its operation.
106DrivingOperationFacing uphill, with the vehicle stationary, the vehicle is held for a short time when the driver releases the brake pedal:–If first gear or neutral is engaged on a manual gearbox.–If mode D or M is selected on an automatic gearbox.–If mode D or B is selected on the drive selector.Facing downhill, with the vehicle stationary and reverse gear engaged, the vehicle is held for a short time when the driver releases the brake pedal.MalfunctionIf the event of a malfunction, these warning lamps light up on the instrument panel, accompanied by the display of a message.Have it checked by a PEUGEOT dealer or a qualified workshop.Gear shift indicatorThis system is designed to reduce fuel consumption by recommending the most suitable gear.OperationDepending on the driving situation and the vehicle's equipment, the system may recommend skipping one or more gears.Gear engagement recommendations are not to be considered mandatory. Indeed, the configuration of the road, the traffic density and safety remain determining factors when choosing the best gear. Therefore, the driver remains responsible for deciding whether or not to follow the system’s advice.The system cannot be deactivated.With an automatic gearbox, the system is only active in manual operation.The information appears on the instrument panel, in the form of an arrow and the recommended gear.The system adapts the gear change instructions according to the driving conditions (e.g.slope, load) and driving style (e.g.power demand, acceleration, braking).The system never suggests:–engaging first gear.–engaging reverse gear.Stop & StartThe Stop & Start function puts the engine temporarily into standby - STOP mode - during phases when the vehicle is stationary (e.g.red lights, traffic jams). The engine automatically restarts - START mode - as soon as the driver indicates the intention of moving off again.Primarily designed for urban use, the function is intended to reduce fuel consumption and exhaust emissions as well as the noise level when stationary.The function does not affect the functionalities of the vehicle, in particular the braking.Deactivation/ReactivationBy default, the function is activated when the ignition is switched on.With Touch screen 10" & Bluetooth Radio & TelephoneThe settings are changed via the Drivingtouch screen menu.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131