Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Driving Drive selector (Electric)

103Driving6However, in modeN, modeP will be engaged after a delay of 5seconds (time to enable free-wheeling mode).Check that modeP has been engaged and that the electric parking brake was applied automatically; if not, apply it manually.The corresponding indicator lamps on the gear selector and the electric parking brake control must be on, as well as the indicator lamps on the instrument panel.Gearbox malfunctionThis warning lamp comes on, accompanied by an audible signal and the display of a message.Go to a PEUGEOT dealer or a qualified workshop.Do not drive faster than 62mph (100km/h), keeping to the speed limit.Switching of the gearbox to back-up modeMode D locks in third gear.The paddles on the steering wheel do not work and mode M is no longer accessible.You may feel a significant jolt on engaging reverse gear. This will not damage the gearbox.Selector malfunctionMinor malfunctionThis warning lamp comes on, accompanied by the display of a message and an audible signal.Drive carefully.Go to a PEUGEOT dealer or a qualified workshop.In some cases, the selector indicator lamps may no longer come on, but the gearbox state is still displayed on the instrument panel.Major malfunctionThis warning lamp comes on, accompanied by the display of a message.You must stop the vehicle.Stop as soon as it is safe to do so and switch off the ignition.Contact a PEUGEOT dealer or a qualified workshop.Drive selector (Electric)The drive selector is a pulse selector with a regenerative braking function.The drive selector provides traction control based on the driving style, the road profile and the vehicle load.With regenerative braking activated, it also manages engine braking when the accelerator pedal is released.P.ParkButton for parking the vehicle: the front wheels are locked (the button lights up to indicate that it is activated).R.ReverseTo engage reverse gear, with your foot on the brake pedal.N.NeutralTo move the vehicle with the ignition off and so allow it to free-wheel.For more information on Free-wheeling, refer to the corresponding section.D.Drive (automatic forward gear)B.Brake (regenerative braking)Regenerative braking (the button lights up to indicate its activation).Information displayed on the instrument panelWhen the ignition is switched on, the drive selector status is displayed on the instrument panel:P : Park.R : Reverse.N : Neutral.D : Drive (automatic forward gear).
104DrivingB : Brake (regenerative braking activated).Operation►In mode N, with your foot on the brake pedal, push without passing the point of resistance:•Forwards, mode R is selected.•Backwards, mode D is selected.Release the selector fully after each push; it will then return to its initial position.Special casesTo avoid mode N (quick change from D to R and back again):►In mode R, push backwards past the point of resistance, mode D is selected.►In mode D, push forwards past the point of resistance,mode R is selected.►To return to mode N, push without passing the point of resistance.Regenerative brakingWith the Brake function and when deceleratingThe Brake function emulates engine braking, slowing the vehicle with no need to depress the brake pedal. The vehicle slows more quickly when the driver releases the accelerator pedal.The energy recovered when the accelerator pedal is released is then used to partially recharge the traction battery, thereby increasing the vehicle's driving range.The resulting deceleration of the vehicle does not cause the brake lamps to come on.►From mode D/B, move the push selector backwards to activate/deactivate the function.D on the instrument panel is replaced with B.The system status is not saved when the ignition is switched off.In some situations (e.g.battery full, extreme temperatures), the amount of regenerative braking may be temporarily limited, resulting in less deceleration.The driver must remain alert to traffic conditions and must always be ready to use the brake pedal.With the brake pedalWhen the brake pedal is depressed, the intelligent braking system automatically recovers some of the energy and uses it to recharge the traction battery.This energy recovery also reduces use of the brake pads, thereby limiting their wear.The driver may experience a different sensation when depressing the brake pedal compared to a vehicle without regenerative braking.Driving modesThe driving modes available depend on the engine and equipment of the vehicle.Driving modes are selected using the following control:►Press the control to display the modes on the instrument panel.With an electric vehicle, when starting the vehicle, no mode can be selected until the READY indicator lamp is displayed.When the message disappears, the selected mode is activated and remains indicated on the instrument panel (except Normal mode).With the Advanced Grip Control system, additional driving modes are available.For more information on Advanced Grip Control, refer to the corresponding section.For petrol/Diesel versionsWhenever the ignition is switched on, Normaldriving mode is selected by default.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131