Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Driving Distraction detection

134Driving–The vehicle's speed is between 6 mph and 53 mph (10km/h and 85 km/h) (versions with camera only) or 87 mph (140 km/h) (versions with camera and radar) when a moving vehicle is detected.This warning lamp flashes (for approximately 10seconds) as soon as the function applies the vehicle’s brakes.During the flashing time, the function is not available.With an automatic gearbox or drive selector, in the event of automatic emergency braking, keep the brake pedal depressed, also after a complete stop is reached, to prevent the vehicle from rolling away.With a manual gearbox, in the event of automatic emergency braking bringing the vehicle to a complete stop, the engine may stall.The driver can override the automatic emergency braking at any time by strongly turning the steering wheel (evasive manoeuver) and/or by firmly pressing the accelerator pedal.The brake pedal may feel hard and vibrate slightly while the function is operating.If the vehicle comes to a complete stop, automatic braking is maintained for 1 to 2seconds.Deactivation/ActivationBy default, the system is automatically activated at every engine start.With Touch screen 10" & Bluetooth Radio & TelephoneThe settings are changed via the Drivingtouch screen menu.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectThe settings are changed via the ADAStouch screen application.Deactivation of the system is signalled by the illumination of this warning lamp, accompanied by the display of a message.The system cannot be deactivated above 10km/h.MalfunctionThis warning lamp lights up on the instrument panel with the message "Driving Assistance Sensor blind: Clean sensor, see User Manual" if the sensor is masked.This is a normal behavior, which does not request the support of a qualified workshop.In this case, stop the vehicle and verify if the front camera or the front radar is covered by dirt, mud, sand, snow, ice or anything preventing the sensing.The system is operational again after the detection field has been cleaned.In the event of a malfunction, this warning lamp lights up on the instrument panel, accompanied by the display of a message and an audible signal.Have it checked by a PEUGEOT dealer or a qualified workshop.If these warning lamps come on after the engine has been switched off and then restarted, contact a PEUGEOT dealer or a qualified workshop to have the system checked.These warning lamps light up on the instrument panel and/or in the warning lamp display for seat belts and front passenger airbag to indicate that the driver's and/or front passenger's seat belt is not fastened (depending on version). The automatic braking system is deactivated until the seat belts are fastened.Distraction detectionFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.The function comprises the "Driver Attention Warning" system combined with the "Driver Attention Warning by Camera" system.
135Driving6These systems are in no way designed to keep the driver awake or to prevent the driver from falling asleep at the wheel. It is the driver’s responsibility to stop if feeling tired.Take a break if you are feeling tired or at least every 2 hours.Driver Attention WarningThe system triggers an alert when it detects that the driver has not taken a break after two hours of driving at a speed above 43 mph (70km/h).This alert is issued via the display of a message encouraging the driver to take a break, accompanied by an audible signal.If the driver does not follow this advice, the alert is repeated hourly until the vehicle is stopped.The system resets itself if one of the following conditions is met:–With the engine running, the vehicle has been stationary for more than 15 minutes.–The ignition has been switched off for a few minutes.–The driver's seat belt is unfastened and their door is opened.As soon as the speed of the vehicle drops below 43mph (70km/h), the system goes into standby.Driving time starts being counted again once the speed reaches above 43mph (70km/h).Driver Attention Warning by CameraThe system assesses the driver's level of alertness, fatigue and distraction by identifying trajectory changes in relation to the lane markings.To do this, the system uses a camera, placed on the upper part of the windscreen.This system is particularly suited to fast roads (speed higher than 43 mph (70km/h)).The system may perform a learning procedure for up to 30minutes after the start of the monitoring.During this period, the driver's individual driving behaviour is analysed and no alert is given.At a first alert level, the driver is warned by the message "Caution!", accompanied by an audible signal.After three first-level alerts, the system triggers a further alert with the message "Driving at risk: Take a break", accompanied by a more pronounced audible signal.In certain driving conditions (poor road surface or strong winds), the system may give alerts independent of the driver's level of vigilance.The following situations may interfere with the operation of the system or prevent it from working:–Lane positioning assist is active.–poor visibility (e.g.inadequate street lighting, heavy rain, thick fog, snowfall).–dazzle (e.g.headlamps of an oncoming vehicle, low sun, reflections on a damp road, leaving a tunnel, alternating shade and light).–windscreen area located in front of the camera (e.g.dirty, misted, frost-covered, snow-covered, damaged or masked by a sticker).–lane markings absent, worn, hidden (e.g.snow, mud, dead leaves) or multiple (roadworks).–close to the vehicle ahead (lane markings not detected).–roads that are narrow, winding.
136DrivingDeactivation/ ActivationBy default, the function is automatically activated at every engine start.With Touch screen 10" & Bluetooth Radio & TelephoneThe settings are changed via the Drivingtouch screen menu.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectThe settings are changed via the ADAStouch screen application.orDirect access to the Shortcuts for driving aids.Deactivation is confirmed by the illumination of this indicator lamp on the instrument panel.MalfunctionIn the event of a malfunction, this warning lamp lights up on the instrument panel, accompanied by the display of a message and an audible signal.Have it checked by a PEUGEOT dealer or a qualified workshop.This warning lamp lights up on the instrument panel with the message "Driving Assistance Sensor blind: Clean sensor, see User Manual" if the sensor is masked.This is a normal behavior, which does not request the support of a qualified workshop.In this case, stop the vehicle and verify if the front camera is covered by dirt, mud, sand, snow, ice or anything preventing the sensing.The system is operational again after the detection field has been cleaned.Parking sensorsFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system detects and signals the proximity of obstacles (e.g.pedestrian, vehicle, tree, barrier) using sensors located in the bumper.Rear parking sensorsSystem startup is available under the following conditions:–when reverse gear is engaged.–when the vehicle is moving backwards (e.g.downhill, in neutral).It is indicated by an audible confirmation signal and a display indication.If an obstacle is detected as soon as the reverse gear is engaged, an audible detection signal is given directly instead of the audible confirmation signal.If no audible signal is given, the display indication is not shown or a warning message appears, the system has a failure.Audible assistanceThe system signals the presence of obstacles which are both within the sensors’ detection zone and in the vehicle path defined by the direction of the steering wheel.Depending on version, in the example shown, only the obstacles present in the shaded area will be signalled by the audible assistance.The proximity information is given by an intermittent audible signal, the frequency of
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131