Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Driving Active Safety Brake with Collision Risk Alert

131Driving6No alert is triggered in the following conditions:–presence of stationary objects (e.g.parked vehicles, safety rails, lampposts, signs).–vehicles travelling in the opposite direction.–on winding roads or in case of sharp turns.–when overtaking or being overtaken by a very long vehicle (e.g.truck, bus), which is both detected in a blind spot from behind and present in the driver's field of vision from the front.–quick overtaking manoeuvre.–very heavy traffic: vehicles detected in front and behind are confused with a lorry or a stationary object.MalfunctionIf the event of a malfunction, this warning lamp lights up on the instrument panel, accompanied by the display of a message.Have it checked by a PEUGEOT dealer or a qualified workshop.The system may be temporarily disturbed by certain weather conditions (e.g.rain, hail).In particular, driving on a wet road or going from a dry to a wet area can cause false alerts (e.g.presence of a cloud of water droplets in the blind spot interpreted as a vehicle).In bad or wintry weather, ensure that the sensors are not covered by mud, ice or snow.Take care not to cover the warning zone in the door mirrors, or the detection zones on the front and rear bumpers with adhesive labels or other objects; they may hamper correct operation of the system.Active Safety Brake with Collision Risk Alert and Intelligent emergency braking assistanceFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.This system:–warns the driver that their vehicle is at risk of collision with the preceding vehicle, a pedestrian or a cyclist.–reduces the vehicle's speed to avoid a collision or to limit its severity.Below a speed of 19 mph (30km/h), automatic emergency braking may slow down the vehicle to a complete stop.Otherwise, for versions with camera only, the speed may be reduced by a maximum of 16 mph (25km/h).For versions with camera and radar, the speed reduction may be extended to 31 mph (50km/h), if both sensors are able to detect the thread.The system also takes motorcyclists into account.It may also react on animals. Animals (especially animals smaller than 0.5m) and objects on the road are not necessarily detected.This system includes three functions:–Collision Risk Alert.–Intelligent emergency braking assistance (iEBA).
132Driving–Active Safety Brake (automatic emergency braking).The vehicle has a multifunction camera located at the top of the windscreen and, depending on version, a radar located in the front bumper.This system does not replace the need for driver vigilance.This system is designed to assist the driver and improve road safety.It is the driver's responsibility to continuously monitor traffic conditions in accordance with applicable driving regulations.As soon as the system detects a potential collision, it prepares the braking circuit. This may cause a slight noise and a slight sensation of deceleration.Operating conditions and limitsVehicle moving forward without trailer.Brake system operational.ASR system activated.Seat belts fastened for all passengers.Stabilised speed on roads with no or low curvature.This warning lamp lights up on the instrument panel without any additional message, to indicate that the automatic braking system is not available.This is a normal behavior indicating that a condition is not fulfilled and which does not request the support of a workshop.In any situations with ignition on where automatic braking presents a risk, deactivating the system via the vehicle's configuration menu is recommended, for instance:–Towing a trailer (particularly a trailer without its own braking system).–Carrying long objects on roof bars.–Driving with snow chains.–Using an automatic car wash.–Performing any maintenance (e.g.changing a wheel, working inside the engine compartment).–Placing the vehicle on a rolling bench in a workshop.–Towing the vehicle.–Following a damage of the windscreen close to the detection camera.The system is automatically deactivated when the use of certain types of "space-saver" spare wheel (smaller diameter) is detected, or if a fault with the brake pedal switch or at least two brake lamps is detected.Following a severe crash (e.g.with airbag deployment), the system is automatically deactivated.Have it checked by a PEUGEOT dealer or a qualified workshop.In case the detection is degraded or temporarily unavailable by environment conditions, then a driver indication is not displayed (because a driver action is not requested).It can be dangerous to drive if the brake lamps are not in perfect working order.The driver must not overload the vehicle (keep within the GVW limit and load height limits for roof bars).Collision Risk AlertThis function warns the driver if there is a risk of collision with the preceding vehicle, or with a pedestrian or cyclist.Modifying the alert trigger thresholdThe trigger threshold determines the sensitivity with which the function warns of the risk of collision.
133Driving6The selected threshold is memorised when the ignition is switched off.With Touch screen 10" & Bluetooth Radio & TelephoneThe threshold is set via the Driving touch screen menu.►Select one of the three pre-defined thresholds: "Far", "Normal" or "Close".With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectThe threshold is set via the ADAS touch screen application.►Select one of the 3 preset thresholds: "Far", "Medium" or "Near".OperationDepending on the collision risk detected by the system and the alert trigger threshold chosen by the driver, different levels of alert may be triggered and displayed on the instrument panel.The system takes into account the vehicle dynamics, the difference speed of the own vehicle and the object identified for the collision risk, and the operation of the vehicle (e.g.actions on the pedals, steering wheel) to trigger the alert at the most relevant moment.(orange)Level 1: visual alert only, warning that the preceding vehicle is very close.The message "Vehicle close" is displayed.(red)Level 2: visual and audible alert, warning that a collision is imminent.The message "Brake!" is displayed.While approaching a vehicle too quickly, the level 2 alert may be displayed directly.Important: the level 1 alert depends on the trigger threshold selected. It reacts only on moving vehicles. It is disabled automatically at lower speed.It is possible that collision warnings are not given, are given too late or seem unjustified.The driver must always stay in control of the vehicle and be prepared to react at any time to avoid an accident.Intelligent emergency braking assistance (iEBA)This function increases vehicle deceleration if the driver does not brake enough to avoid a collision.This assistance is only provided if the driver presses the brake pedal.Active Safety BrakeThis function, also called "automatic emergency braking", intervenes after the acoustic alert if the driver does not operate the brake pedal quickly enough.The system aims at reducing the speed of impact or avoiding a collision if the driver fails to react.OperationThe system operates subject to the following conditions:–At reduced speed in an urban environment, when a stationary vehicle, pedestrian or cyclist is detected.
134Driving–The vehicle's speed is between 6 mph and 53 mph (10km/h and 85 km/h) (versions with camera only) or 87 mph (140 km/h) (versions with camera and radar) when a moving vehicle is detected.This warning lamp flashes (for approximately 10seconds) as soon as the function applies the vehicle’s brakes.During the flashing time, the function is not available.With an automatic gearbox or drive selector, in the event of automatic emergency braking, keep the brake pedal depressed, also after a complete stop is reached, to prevent the vehicle from rolling away.With a manual gearbox, in the event of automatic emergency braking bringing the vehicle to a complete stop, the engine may stall.The driver can override the automatic emergency braking at any time by strongly turning the steering wheel (evasive manoeuver) and/or by firmly pressing the accelerator pedal.The brake pedal may feel hard and vibrate slightly while the function is operating.If the vehicle comes to a complete stop, automatic braking is maintained for 1 to 2seconds.Deactivation/ActivationBy default, the system is automatically activated at every engine start.With Touch screen 10" & Bluetooth Radio & TelephoneThe settings are changed via the Drivingtouch screen menu.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectThe settings are changed via the ADAStouch screen application.Deactivation of the system is signalled by the illumination of this warning lamp, accompanied by the display of a message.The system cannot be deactivated above 10km/h.MalfunctionThis warning lamp lights up on the instrument panel with the message "Driving Assistance Sensor blind: Clean sensor, see User Manual" if the sensor is masked.This is a normal behavior, which does not request the support of a qualified workshop.In this case, stop the vehicle and verify if the front camera or the front radar is covered by dirt, mud, sand, snow, ice or anything preventing the sensing.The system is operational again after the detection field has been cleaned.In the event of a malfunction, this warning lamp lights up on the instrument panel, accompanied by the display of a message and an audible signal.Have it checked by a PEUGEOT dealer or a qualified workshop.If these warning lamps come on after the engine has been switched off and then restarted, contact a PEUGEOT dealer or a qualified workshop to have the system checked.These warning lamps light up on the instrument panel and/or in the warning lamp display for seat belts and front passenger airbag to indicate that the driver's and/or front passenger's seat belt is not fastened (depending on version). The automatic braking system is deactivated until the seat belts are fastened.Distraction detectionFor more information, refer to the General recommendations on the use of driving and manoeuvring aids.The function comprises the "Driver Attention Warning" system combined with the "Driver Attention Warning by Camera" system.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131