Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Dashboard instruments Lighting dimmer

24Dashboard instrumentsThe devices in question are the heating and air conditioning systems.This equipment can be used:–If the vehicle is not plugged in, when the READY lamp is lit.–If the vehicle is plugged in, when the ignition is switched on ("Lounge" mode).Selecting ECO mode limits the performance of some of this equipment. The needle or cursor on the thermal comfort consumption indicator then moves into the "ECO" zone.To quickly heat or cool the passenger compartment, feel free to temporarily select the maximum heating or cooling setting.When the heating is on maximum, the gauge on the thermal comfort consumption indicator is in the MAX zone. When the air conditioning is on maximum, it stays in the ECO zone.Excessive use of thermal comfort equipment, particularly at low speed, can significantly decrease the vehicle's range.Remember to optimise equipment settings upon achieving the desired level of comfort, and adjust them if necessary whenever you start the vehicle.After an extended period without using the heating, you may notice a slight odour during the first few minutes of use.Manual testThis function allows you to check certain indicators and display the alerts log.With Touch screen 10" & Bluetooth Radio & TelephoneIt can be accessed via the "Check" button in the Driving touch screen menu.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectIt can be accessed via the Settings> Vehicle touch screen application.►Select Safety > Diagnostics.The following information is displayed on the instrument panel:–Tyre pressures.–Engine oil level (depending on engine).–Next service due.–Driving range associated with the AdBlue® and the SCR system (BlueHDiDiesel).–Current alerts.This information is also displayed automatically every time the ignition is switched on.Total distance recorderThe total distance recorder measures the total distance travelled by the vehicle since its initial registration.With the ignition on, the total distance is displayed at all times. It remains displayed for 30seconds after switching off the ignition. It is displayed when the driver's door is opened, and when the vehicle is locked or unlocked.When travelling abroad, you may have to change the distance units (miles or km): the displayed speed must be in the local country’s official unit (mph or km/h).The unit is changed via the screen's configuration menu, with the vehicle stationary.Lighting dimmerThis system allows the brightness of the instruments and controls to be adjusted manually to suit the ambient light level.With Touch screen 10" & Bluetooth Radio & Telephone►Press Settings from the status bar or from the menus buttons./►Select "Brightness" or "Screen configuration", depending on equipment.►Adjust the instrument panel and screen brightness by using the arrows or moving the slider.
25Dashboard instruments1/►Press this button to save and exit, depending on equipment.You can also switch off the screen:►Press Settings from the status bar or from the menus buttons.►Select "Turn off screen" or "Dark", depending on equipment.The screen goes off completely.►Press the screen again (anywhere on its surface) to turn it on.With PEUGEOT i-Connect Advanced- PEUGEOT i-ConnectIt is configured in the Settings> Brightness touch screen application.►In the "Cockpit" category, press or move the slider to the desired setting.Trip computerDisplays information related to the current trip (range, fuel consumption, average speed, etc.).Data displayed on the instrument panelWith instrument panels with dialsPressing the end of the wiper control stalk displays the trip computer data.With digital instrument panelTrip computer data is permanently displayed when the "Personal" display mode is selected.In all other display modes, pressing the end of the wiper control stalk will cause this data to appear temporarily in a specific window.Display of the various tabs►Pressing the button located on the end of the wiper control stalk displays the following tabs in turn:–Current information:•Driving range (Petrol or Diesel).•Current fuel consumption.•Stop & Start time counter (Petrol or Diesel).–Trips "1" then "2":•Average speed.•Average fuel consumption.•Distance travelled.Trip reset►When the desired trip is displayed, press the button on the end of the wiper control stalk for more than 2seconds.Trips "1" and "2" are independent and are used in the same way.DefinitionsRange(miles or km)(Traction battery charge level percentage) (Electric)Distance that can still be travelled with the fuel remaining in the tank (based on the average fuel consumption over the last few miles (kilometres) travelled).This value may vary following a change in driving style or terrain, leading to a significant change in current fuel consumption.When the range falls below 19 miles (30km), dashes are displayed.After filling with at least 5 litres of fuel, the range is recalculated and is displayed if it exceeds 62 miles (100km).Dashes appearing permanently in place of numbers while driving indicates a malfunction.Consult a PEUGEOT dealer or a qualified workshop.Current consumption(mpg or l/100km or km/l)(miles/kWh or kWh/100km or km/kWh) (Electric)/Calculated during the last few seconds.This function is only displayed at speeds above 19 mph (30km/h) (Petrol or Diesel).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131