Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Access Sunroof

41Access2For your children's safety, ignition on or engine on, press control 5 to deactivate the controls for the rear electric windows, irrespective of their positions.The red indicator lamp in the button comes on.The rear electric windows can still be controlled using the driver's controls.In the event of a serious impact, use of the rear electric window controls is re-enabled, if they had been deactivated.Reinitialising the electric windowsAfter reconnecting the battery, or in the event of abnormal window movement, the anti-pinch function must be reinitialised.Automatic window closing is no longer available, only manual closing is possible.Remote window closing with the electronic key is also no longer available in this case.The anti-pinch function is inoperable during the following sequence of operations.For each window:►Lower the window fully, then raise it; it will rise in steps of a few centimetres each time the control is pressed. Repeat the operation until the window is fully closed.►Continue to pull the control for at least one second after the window reaches the closed position.If an electric window meets an obstacle during operation, the movement of the window must be reversed. To do this, press the relevant control.When the driver operates the passengers’ electric window controls, it is important to ensure that nothing can prevent the window from closing properly.It is important to ensure that passengers use the electric windows correctly.Pay particular attention to children when operating the windows.Be aware of passengers and/or other persons present when closing windows remotely using the electronic key.Do not put your head or arms through the open windows when the vehicle is moving - risk of serious injury!SunroofThe sunroof consists of a movable glass panel that slides over the roof and a blind that can be opened independently. Opening the sunroof automatically opens the blind.►To operate the panoramic sunroof, use the button in the roof console.The sunroof can be operated when the ignition is turned on (if the battery is charged enough), with the engine running, in STOP mode of Stop & Start, and up to 45seconds after turning off the ignition or after locking the vehicle.PrecautionsDo not put your head or arms through the sunroof while the vehicle is moving - risk of serious injury!Ensure that any luggage or accessories carried on the roof bars do not interfere with the movement of the sunroof.Do not place heavy loads on the movable glass panel of the sunroof.If the sunroof is wet, following a rain shower or washing the vehicle, wait until it is completely dry before operating it.Do not operate the sunroof if it is covered by snow or ice - risk of damage!
42AccessUse only plastic scrapers to remove snow or ice from the sunroof.Regularly check the condition of the sunroof seals (e.g.presence of dust, dead leaves).If using a car wash, check first that the roof is correctly closed and keep the high-pressure jet at least 30 centimetres from the seals.Never leave the vehicle with the sunroof open.OperationWhen opening the sunroof fully, the movable glass moves to a partially open position, then slides over the roof. Any intermediate position is possible.Before operating the sunroof control button, ensure that no object or person might prevent the movement.Pay particular attention to children when operating the sunroof.If something is trapped when operating the sunroof, reverse the movement of the sunroof by pressing the control button in question.The driver must ensure that passengers use the sunroof correctly.Any manual intervention on the position of the sunroof may disturb the anti-pinch device. Perform a reinitialisation.Anti-pinch systemIf the sunroof encounters an obstacle when closing, the movement is automatically reversed.The roof anti-pinch system is designed to be effective at speeds of up to 75 mph (120km/h).Opening/closing the sunroof►To open the sunroof, use the part of the button located towards the rear.►To close the sunroof, use the part of the button located towards the front.Operating the button►Pressing the button beyond its point of resistance opens or closes the sunroof fully.►Pressing the button again stops the movement in progress.►By keeping the button pressed (without going beyond the point of resistance), the movement of the glass stops when this button is released.►When the sunroof is closed: pressing once without passing the point of resistance moves it to the partially open position.►When the sunroof is partially open: pressing once on the front part of the button, without going beyond the point of resistance, closes it completely.The sunroof and windows can be closed by holding down the door locking control. The manoeuvre stops as soon as the locking control is released.Opening/closing the blind►To open the blind, pull its handle backwards until the desired position is reached.►To close the blind, push itshandle forwards until the desired position is reached.ReinitialisationReinitialisation is required after reconnecting the battery, or if the sunroof malfunctions or moves in a jerky manner.►Check that nothing is affecting the movement of the sunroof and that the seals are clean.►With the ignition on, fully close the sunroof.►Press and hold the front part of the button until the sunroof moves slightly, hold for a further 1 second, then release.►Wait 2 seconds then press and hold the front part of the button again. The sunroof will open and close again. Once the roof is fully closed again, hold for a further 2 seconds, then release.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131