Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Access Electric windows

40Accessduring your absence. When the ignition is switched on, this flashing stops.Failure of the remote controlTo deactivate the monitoring functions:►Unlock the vehicle using the key in the driver's door lock.►Open the door; the alarm is triggered.►Switch on the ignition; this stops the alarm. The indicator lamp in the button goes off.Locking the vehicle without activating the alarm►Lock or deadlock the vehicle using the key (built-in the remote control) in the driver's door lock.MalfunctionWhen the ignition is switched on, the fixed lighting of the red indicator lamp in the button indicates a system malfunction.Have it checked by a PEUGEOT dealer or a qualified workshop.Automatic activation(Depending on version)The system is activated automatically 2 minutes after the last door or the boot is closed.►To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control or unlock the vehicle using the "Keyless Entry and Start" system.Electric windows1.Left-hand front2.Right-hand front3.Right-hand rear4.Left-hand rear5.Deactivation of electric window controls located by rear seatsFor more information on the Electric child lock, refer to the corresponding section.Manual operation►To open/close the window, press/pull the switch without passing the point of resistance; the window stops as soon as the switch is released.Automatic operation►To open/close the window, press/pull the switch past its resistance point: the window opens/closes completely when the switch is released.Operating the switch again stops the movement of the window.Window controls remain operational for approximately 45seconds after switching off the ignition or after locking the vehicle.After that time, the controls are disabled. To reactivate them, switch on the ignition or unlock the vehicle.Anti-pinchIf the window meets an obstacle while rising, it stops and immediately partially lowers again.Overtaking of the anti-pinchAfter triggering the anti-pinch, check that there are no obstacles blocking the movement of the window.Try to close the window again.If the window closing is interrupted by the anti-pinch 3times in a row (max. 10seconds between each action), the anti-pinch function becomes inoperable.Without this protection, the window can only be closed manually - risk of injury!Deactivating the rear controls for the rear electric windows
41Access2For your children's safety, ignition on or engine on, press control 5 to deactivate the controls for the rear electric windows, irrespective of their positions.The red indicator lamp in the button comes on.The rear electric windows can still be controlled using the driver's controls.In the event of a serious impact, use of the rear electric window controls is re-enabled, if they had been deactivated.Reinitialising the electric windowsAfter reconnecting the battery, or in the event of abnormal window movement, the anti-pinch function must be reinitialised.Automatic window closing is no longer available, only manual closing is possible.Remote window closing with the electronic key is also no longer available in this case.The anti-pinch function is inoperable during the following sequence of operations.For each window:►Lower the window fully, then raise it; it will rise in steps of a few centimetres each time the control is pressed. Repeat the operation until the window is fully closed.►Continue to pull the control for at least one second after the window reaches the closed position.If an electric window meets an obstacle during operation, the movement of the window must be reversed. To do this, press the relevant control.When the driver operates the passengers’ electric window controls, it is important to ensure that nothing can prevent the window from closing properly.It is important to ensure that passengers use the electric windows correctly.Pay particular attention to children when operating the windows.Be aware of passengers and/or other persons present when closing windows remotely using the electronic key.Do not put your head or arms through the open windows when the vehicle is moving - risk of serious injury!SunroofThe sunroof consists of a movable glass panel that slides over the roof and a blind that can be opened independently. Opening the sunroof automatically opens the blind.►To operate the panoramic sunroof, use the button in the roof console.The sunroof can be operated when the ignition is turned on (if the battery is charged enough), with the engine running, in STOP mode of Stop & Start, and up to 45seconds after turning off the ignition or after locking the vehicle.PrecautionsDo not put your head or arms through the sunroof while the vehicle is moving - risk of serious injury!Ensure that any luggage or accessories carried on the roof bars do not interfere with the movement of the sunroof.Do not place heavy loads on the movable glass panel of the sunroof.If the sunroof is wet, following a rain shower or washing the vehicle, wait until it is completely dry before operating it.Do not operate the sunroof if it is covered by snow or ice - risk of damage!
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131