Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2019-2025 Owner's Manual Access Alarm

38AccessBootOpeningAfter unlocking the vehicle or just the boot (depending on version), press the opening control and then lift the tailgate.ClosingLower the tailgate using one of the interior grab handles.In the event of a malfunction or if you experience difficulty opening or closing the tailgate, have it checked by a PEUGEOT dealer or a qualified workshop without delay, to avoid the issue deteriorating and prevent any risk of the tailgate dropping, potentially causing serious injury.Back-up releaseTo manually unlock the boot in the event of a battery or central locking failure.UnlockingFold the rear seats to gain access to the lock from inside the boot.Insert a small screwdriver into hole A of the lock to unlock the boot.Move the latch to the left.Locking after closingIf the fault persists after closing again, the boot will remain locked.In the event of a fault with the central locking system, it is essential to disconnect the battery to lock the boot and so ensure complete locking of the vehicle.Alarm(Depending on version)System which protects and provides a deterrent against theft and break-ins.Exterior perimeter monitoringThe system checks for opening of the vehicle.The alarm is triggered if anyone tries to open a door, the boot or the bonnet, for example.Interior volumetric monitoringThe system checks for any variation in volume in the passenger compartment.The alarm is triggered if anyone breaks a window, enters the passenger compartment or moves inside the vehicle.Anti-tilt monitoringThe system checks for any change in the attitude of the vehicle.The alarm goes off if the vehicle is lifted or moved.When the vehicle is parked, the alarm will not be triggered if the vehicle is knocked.Self-protection functionThe system checks whether any of its components are out of service.The alarm is triggered if the battery, the central control or the siren wiring is put out of service or damaged.Work on the alarm systemConsult a PEUGEOT dealer or a qualified workshop.
39Access2Locking the vehicle with full alarm systemActivationSwitch off the ignition and exit the vehicle.Lock or deadlock the vehicle using the remote control or by pressing on the driver's door handle.When the monitoring system is active, the red indicator lamp in the button flashes once per second and the direction indicators come on for about 2 seconds.The exterior perimeter monitoring is activated after 5 seconds and the interior volumetric and anti-tilt monitoring after 45 seconds.The alarm does not activate when locking automatically from a distance.Door, boot or bonnetIf an opening is not properly closed, the vehicle is not locked, but the exterior perimeter monitoring will be activated after 45 seconds, at the same time as the interior volumetric and anti-tilt monitoring.DeactivationPress the remote control unlocking button.orUnlock the vehicle by pressing the driver’s door handle.The monitoring system is deactivated: the indicator lamp in the button goes off and the sidelamps and/or the daytime running lamps flash for about 2 seconds.After unlocking using the remote controlIf the vehicle automatically locks itself again (as happens if a door or the boot is not opened within 30 seconds of unlocking), the monitoring system is automatically activated.Locking the vehicle with exterior perimeter monitoring onlyDeactivate the interior volumetric and anti-tilt monitoring to avoid the unwanted triggering of thealarm,in certain cases such as:Slightly open window.Washing the vehicle.Changing a wheel.Towing the vehicle.Transport on a ship or ferry.Deactivating the interior volumetric and anti-tilt monitoringSwitch off the ignition and within 10 seconds press the alarm button until its red indicator lamp is on fixed.Get out of the vehicle.Immediately lock the vehicle using the remote control or the Keyless Entry and Start system.Only the exterior perimeter monitoring is activated; the button's red indicator lamp flashes once every second.To take effect, this deactivation must be carried out after each time the ignition is switched off.Reactivating the interior volumetric and anti-tilt monitoringDeactivate the exterior perimeter monitoring by unlocking the vehicle using the remote control or the Keyless Entry and Start system.The indicator lamp in the button goes off.Reactivate all monitoring by locking the vehicle using the remote control or the Keyless Entry and Start system.The red indicator lamp in the button once again flashes every second.Triggering of the alarmThis is indicated by sounding of the siren and flashing of the direction indicators for 30 seconds.Depending on the country of sale, certain monitoring functions remain active until the alarm has been triggered eleven times consecutively.When the vehicle is unlocked using the remote control or the Keyless Entry and Start system, rapid flashing of the red indicator lamp in the button informs you that the alarm was triggered
40Accessduring your absence. When the ignition is switched on, this flashing stops.Failure of the remote controlTo deactivate the monitoring functions:Unlock the vehicle using the key in the driver's door lock.Open the door; the alarm is triggered.Switch on the ignition; this stops the alarm. The indicator lamp in the button goes off.Locking the vehicle without activating the alarmLock or deadlock the vehicle using the key (built-in the remote control) in the driver's door lock.MalfunctionWhen the ignition is switched on, the fixed lighting of the red indicator lamp in the button indicates a system malfunction.Have it checked by a PEUGEOT dealer or a qualified workshop.Automatic activation(Depending on version)The system is activated automatically 2 minutes after the last door or the boot is closed.To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control or unlock the vehicle using the "Keyless Entry and Start" system.Electric windows1.Left-hand front2.Right-hand front3.Right-hand rear4.Left-hand rear5.Deactivation of electric window controls located by rear seatsFor more information on the Electric child lock, refer to the corresponding section.Manual operationTo open/close the window, press/pull the switch without passing the point of resistance; the window stops as soon as the switch is released.Automatic operationTo open/close the window, press/pull the switch past its resistance point: the window opens/closes completely when the switch is released.Operating the switch again stops the movement of the window.Window controls remain operational for approximately 45seconds after switching off the ignition or after locking the vehicle.After that time, the controls are disabled. To reactivate them, switch on the ignition or unlock the vehicle.Anti-pinchIf the window meets an obstacle while rising, it stops and immediately partially lowers again.Overtaking of the anti-pinchAfter triggering the anti-pinch, check that there are no obstacles blocking the movement of the window.Try to close the window again.If the window closing is interrupted by the anti-pinch 3times in a row (max. 10seconds between each action), the anti-pinch function becomes inoperable.Without this protection, the window can only be closed manually - risk of injury!Deactivating the rear controls for the rear electric windows
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131