Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2013-2019 Owner's Manual Visibility

108Visibility Lighting controls Main lighting The vehicle has various lamps: - sidelamps, to be seen, - dipped beam headlamps to see without dazzling other drivers, - main beam headlamps to see clearly when the road is clear, - directional headlamps for improved visibility when cornering. Additional lighting Other lamps are installed to fulfil the requirements of particular driving conditions: - a rear foglamp to better signal the presence of the vehicle in foggy conditions, - front foglamps with cornering lighting, - daytime running lamps to be seen during the day, - guide-me-home and welcome lighting for leaving and entering to the vehicle. Automatic lighting functions Various automatic lighting functions are also available depending on options: - guide-me-home lighting, - cornering lighting, - welcome lighting, - daytime running lamps, - automatic illumination of headlamps. In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes. System for selection and control of the various front and rear lamps providing the vehicle's lighting and signalling.
1095Visibility Model without AUTO lighting Model with AUTO lighting Selection ring for main lighting mode Turn the ring to position the symbol required facing the mark. Lighting off. Automatic illumination of headlamps. Sidelamps only. Dipped or main beam headlamps. Dipping the headlamps Pull the stalk to switch the lighting between dipped / main beam headlamps. In the lighting off and sidelamps modes, the driver can switch on the main beam headlamps temporarily ("headlamp flash") by maintaining a pull on the stalk. Displays Illumination of the corresponding indicator lamp in the instrument panel confirms the lighting switched on.
110Visibility Foglamps selection ring The foglamps operate with dipped and main beam headlamps. Front foglamps and rear foglamp When the headlamps switch off with automatic illumination of headlamps (AUTO model) or when the dipped beam headlamps are switched off manually, the foglamps and sidelamps remain on. Turn the ring rearwards to switch off the foglamps, the sidelamps will then switch off. Rotate and release the ring: forwards a first time to switch on the front foglamps, forwards a second time to switch on the rear foglamp, rearwards a first time to switch off the rear foglamp, rearwards a second time to switch of the front fog lamps. Rear foglamp only To switch it on, turn the ring forwards. When the lighting is switched off automatically (with AUTO model), the foglamp and the dipped beam headlamps will remain on. To switch it off, turn the ring rearwards.
1115VisibilityIn good or rainy weather, both day and night, the front foglamps and the rear foglamp are prohibited. In these situations, the power of their beams may dazzle other drivers. They should only be used in fog or snow. In these weather conditions, it is your responsibility to switch on the foglamps and dipped beam headlamps manually as the sunshine sensor may detect sufficient light. Do not forget to switch off the front foglamps and the rear foglamp when they are no longer necessary. Switching on the lamps after the ignition is switched off To reactivate the lighting control, rotate the ring to the "0" position - lamps off, then to the desired position. On opening the driver's door a temporary audible signal warns the driver that the lighting is on. The lamps, with the exception of the sidelamps, switch off automatically after a maximum duration of thirty minutes to prevent discharging of the battery. Switching off the lamps when the ignition is switched off On switching off the ignition, all of the lamps turn off immediately, except for dipped beam if guide-me-home lighting is activated.
112VisibilityDaytime running lamps Daytime lighting, compulsory in certain countries, which comes on automatically when the engine is started making the vehicle more visible to other users. LED lamps They come on when the engine is started. Depending on the country of sale, they are used for: - daytime running lamps * in day mode and sidelamps in night mode (they are brighter when daytime running lamps), or - sidelamps in day and night mode. * Function that can be set in the vehicle configuration menu. This function is assured: - in countries where it is imposed by regulations, by illumination of the dipped beam headlamps with the sidelamps and number plate lamps; this function cannot be deactivated. - for other countries where it is provided, by the use of dedicated lamps (LEDs); this function can be activated or deactivated via the vehicle configuration menu. The lighting control stalk must be placed in the "0" or "AUTO" (day mode) position. Deactivation of the daytime running lamps is effective after operation of the lighting control stalk or after the next engine start; activation is effective immediately. The instruments and controls (instrument panel, multifunction screen, air conditioning control panel, ...) are not illuminated, except in night mode with manual or automatic illumination of headlamps.
1135Visibility Temporarily keeping the dipped beam headlamps on after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor. Manual guide-me-home lighting Switching on With the ignition off, "flash" the headlamps using the lighting stalk. A further "headlamp flash" switches the function off. Switching off The manual guide-me-home lighting switches off automatically after a set time. Parking lamps Side markers for the vehicle by illumination of the sidelamps on the traffic side only. Within one minute of switching off the ignition, operate the lighting control stalk up or down depending on the traffic side (for example: when parking on the left; lighting control stalk upwards; the right hand sidelamps are on). Manual guide-me-home lighting is also available from the remote control lighting button (see the "Remote control" section). This is confirmed by an audible signal and illumination of the corresponding direction indicator warning lamp in the instrument panel. To switch off the parking lamps, return the lighting control stalk to the middle position or switch on the ignition.
114Visibility The sidelamps and dipped beam headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected or in certain cases of activation of the windscreen wipers. As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically. Automatic illumination of headlamps Switching on Turn the ring to the "AUTO" position. Activation of the function is accompanied by a message in the screen. Switching off Turn the ring to another position. Deactivation of the function is accompanied by a message in the screen. Automatic guide-me-home lighting Association with the automatic lighting provides the guide-me-home lighting with the following additional options: - selection of the lighting duration of 15, 30 or 60 seconds, - automatic activation of guide-me-home lighting when the automatic illumination of headlamps is in operation. Operating fault In the event of a fault with the sunshine sensor, the lighting comes on, this warning lamp is displayed in the instrument panel and/or a message appears in the screen, accompanied by an audible signal. Contact a PEUGEOT dealer or a qualified workshop. In fog or snow, the sunshine sensor may detect sufficient light. In this case, the lighting will not come on automatically. Do not cover the sunshine sensor, coupled with the rain sensor and located in the centre of the windscreen behind the rear view mirror; the associated functions would no longer be controlled. Programming The duration of the guide-me-home lighting can be set in the vehicle configuration menu.
1155Visibility Headlamp adjustment To avoid causing a nuisance to other road users, the headlamp beams should be adjusted according to the load in the vehicle. 0. 1 or 2 people in the front seats. - . Intermediate setting 1. 5 people. -. 5 people + maximum authorised load. 2. Driver + maximum authorised load. The initial setting is position "0" . Travelling abroad If using your vehicle in a country that drives on the other side of the road, the headlamps must be adjusted to avoid dazzling on-coming drivers. Contact a PEUGEOT dealer or a qualified workshop.
116Visibility With dipped or main beams, this function makes use of the beam from a front foglamp to illuminate the inside of a bend, when the vehicle speed is below 25 mph (approximately 40 km/h) (urban driving, winding road, intersections, parking manoeuvres...). Cornering lighting with cornering lightingwithout cornering lighting Switching on This function starts: - when the corresponding direction indicator is switched on, or - from a certain angle of rotation of the steering wheel. Switching off The system does not operate: - below a certain angle of rotation of the steering wheel, - above 25 mph (40 km/h), - when reverse gear is engaged.
Windscreen wash 1175Visibility Pull the wiper stalk towards you. The windscreen wash, then the windscreen wipers, operate for a pre-determined time. Wiper controls Programming Various automatic wiper control modes are also available according to the following options: - automatic rain sensitive windscreen wipers, - rear wiping on engaging reverse gear. Manual controls The wipers are controlled directly by the driver. The vehicle's front and rear wipers are designed to improve the driver's visibility progressively according to the climatic conditions. Windscreen wipers Wiping speed: Model without AUTO wiping Model with AUTO wiping fast (heavy rain), normal (moderate rain), intermittent (proportional to the speed of the vehicle), park, single wipe (press down and release), automatic (press down and release), single wipe (pull the stalk briefly towards you).
118!VisibilityRear wiper park, intermittent wipe, wash-wipe (set duration). Reverse gear When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating. Programming The function is activated or deactivated via the vehicle configuration menu. This function is activated by default. If a significant accumulation of snow or ice is present, or when using a bicycle carrier on the boot, deactivate the automatic rear wiper via the vehicle configuration menu. Rear wiper selection ring:
1195VisibilityAutomatic rain sensitive windscreen wipers The windscreen wipers operate automatically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall. Switching on Briefly push the control stalk downwards. This warning lamp comes on in the instrument panel and a message is displayed. Briefly push the control stalk downwards again, or place the control stalk in another position (Int, 1 or 2). This warning lamp goes off in the instrument panel and a message is displayed. Switching off The automatic rain sensitive windscreen wipers must be reactivated by pushing the control stalk downwards, if the ignition has been off for more than one minute.
120Visibility Do not cover the rain sensor, linked with the sunshine sensor and located in the centre of the windscreen behind the rear view mirror. Switch off the automatic rain sensitive wipers when using an automatic car wash. In winter, it is advisable to wait until the windscreen is completely clear of ice before activating the automatic rain sensitive wipers. Operating fault If a fault occurs with the automatic rain sensitive wipers, the wipers will operate in intermittent mode. Have it checked by PEUGEOT dealer or a qualified workshop. Special position of the windscreen wipers This position permits release of the windscreen wiper blades. It is used for cleaning or replacement of the blades. It can also be useful, in winter, to detach the blades from the windscreen. To maintain the effectiveness of the "flat-blade" type of wiper blades, it is advisable to: - handle them with care, - clean them regularly using soapy water, - avoid using them to retain cardboard on the windscreen, - replace them at the first signs of wear. Any action on the wiper stalk in the minute after switching off the ignition places the blades vertically on the screen. To park the blades again, switch on the ignition and operate the wiper stalk.
1215Visibility Courtesy lamps In this position, the courtesy lamp comes on gradually: Take care to avoid leaving anything in contact with the courtesy lamp. - when the vehicle is unlocked, - when the key is removed from the ignition, - when opening a door, - when the remote control locking button is pressed, in order to locate your vehicle. It switches off gradually: - when the vehicle is locked, - when the ignition is switched on, - 30 seconds after the last door is closed. Permanently off. Permanent lighting. With the ignition on, press the corresponding switch. 1.Front / rear courtesy lamps2.Map reading lamps With the "permanent lighting" mode, the lighting time varies according to the circumstances: - with the ignition off, approximately ten minutes, - in energy economy mode, approximately thirty seconds, - with the engine running, unlimited. Map reading lamps
122Visibility Interior mood lighting Switching on At night, interior mood light emittingdiodes - LEDs (courtesy lamp, instrument panel, footwells, back-lit roof lining, panoramic sunroof * ...) come on automatically when the sidelamps are switched on. Switching off The interior mood lighting switches off automatically when the sidelamps are switched off. Settings Illumination of the centre console, back-lit roof lining and panoramic sunroof can be set from the audio system. * Depending on version. The dimmed passenger compartment lighting improves visibility in the vehicle when the light is poor.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131