Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2013-2019 Owner's Manual Practical information Changing a bulb

1657Practical information Changing a bulb Front lamps In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes. The headlamps are fitted with polycarbonate glass with a protective coating: do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product, use a sponge and soapy water or a pH neutral product, when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals. Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns). Do not touch the bulb directly with your fingers, use a lint-free cloth. 1.Daytime running lamps / sidelamps (light emitting diodes - LEDs).2.Dipped beam headlamps (H7-55W).3.Direction indicators (PWY-24W).4.Main beam headlamps (H7-55W).5.Front foglamps (with "cornering lighting" function according to version) (PSX-24W). It is imperative to use only anti-ultraviolet (UV) type bulbs to avoid damaging the headlamp. Always replace a failed bulb with a new bulb with the same type and specification.
166Practical informationChanging dipped beam headlamp bulbs Remove the protective cover by pulling on the tab. Disconnect the bulb connector. Spread the spring to release the bulb. Extract the bulb and change it. Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specifications and colour. When refitting, close the protective cover carefully to preserve the sealing of the headlamp. Rapid flashing of the direction indicator warning lamp (right or left) indicates the failure of a bulb on that side. Changing direction indicator bulbs To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom. Turn the bulb holder an eighth of a turn anti-clockwise and extract it. Remove the bulb and change it. To reassemble, carry out these operations in reverse order.
1677Practical information Changing main beam headlamp bulbs Changing the daytime running lamps / sidelamps (light-emitting diodes - LEDs) For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop. To reassemble, carry out these operations in reverse order, positioning the alignment lug at the bottom. Remove the protective cover by pulling on the tab. Disconnect the bulb connector. Pull out the bulb and replace it.
Changing front foglamp / 168Practical informationdirectional lamps Access to the front foglamp is through the orifice below the bumper. Disconnect the bulb holder connector by pressing on the top of the tongue. Extract the bulb holder by pressing on the two clips clips (top and bottom). Replace the module. To reassemble, carry out these operations in reverse order. Changing integrated direction indicator side repeater bulbs Press the central tongue and remove the side repeater. Pull the bulb holder out and replace the failed bulb. To reassemble, carry out these operations in reverse order. You should contact a PEUGEOT dealer or a qualified workshop for the replacement of these bulbs. Insert a flat screwdriver between the mirror glass and its base. Use the screwdriver as a lever to extract the mirror glass. Unclip the mirror shell by pressing on the two retaining clips. To obtain this module, contact a PEUGEOT dealer or a qualified workshop. You can also contact a PEUGEOT dealer or a qualified workshop for this replacement.
1697Practical information1.Brake lamps (P21W).2.Sidelamps (light emitting diodes - LEDs).3.Direction indicators (PY21W amber).Rear lamps Changing the light emitting diode-LED lamps For replacement, contact a PEUGEOT dealer or qualified workshop. 4.Foglamp (P21W).5.Reversing lamp (P21W).
170Practical informationChanging brake lamp and direction indicator bulbs These bulbs are changed from inside the boot: open the boot, remove the access grille from the corresponding side trim panel, slacken and remove the nut, disconnect the lamp unit connector, remove the lamp unit carefully by it pulling in line towards the outside, press the retaining tabs and remove the bulb holder, turn the bulb a quarter of a turn and change it. To reassemble, carry out these operations in reverse order. Take care to engage the lamp unit in its guides, while keeping it in line with the vehicle. Tighten sufficiently to ensure sealing, but without damaging the lamp.
1717Practical informationChanging the third brake lamp (light emitting diodes - LEDs) Contact a PEUGEOT dealer or a qualified workshop. Number plate lamps To facilitate the removal of the lamp, carry out this operation with the tailgate half open. Insert a thin screwdriver into the lens cutout. Push it outwards. Remove the lens. Change the faulty bulb. To refit, press on the lens to clip it in place. Access is by passing a hand under the bumper. Turn the bulb holder an eighth of a turn and pull it out. Change the failed bulb. To refit, carry out these operations in reverse order. Changing a foglamp or reversing lamp bulb On the left hand side, take care to not touch the exhaust silencer; risk of burns if changing a bulb after stopping the engine.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131