Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2013-2019 Owner's Manual Monitoring Trip computer

36Monitoring Service overdue For 7 seconds after the ignition is switched on, the spanner flashes to indicate that the service must be carried out as soon as possible. Example: the service is overdue by 186 miles (300 km). For 7 seconds after the ignition is switched on, the screen indicates: The distance remaining may be weighted by the time factor, depending on the driving conditions. Therefore, the spanner may also come on if you have exceeded the period since the last service, indicated in the servicing and warranty booklet . Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least five minutes for the zero reset to be taken into account. Service indicator zero reset After each service, the service indicator must be reset to zero. The procedure for resetting to zero is as follows: switch off the ignition, press and hold the trip distance recorder zero reset button, switch on the ignition; the distance recorder display begins a countdown, when the display indicates "=0" , release the button; the spanner disappears. Retrieving the service information You can access the service information at any time. Press the trip distance recorder zero reset button. The service information is displayed for a few seconds, then disappears. 7 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains on .
" or 137MonitoringEngine oil level indicator * Oil level incorrect This is indicated by the flashing of " OIL " or OILOILby the display of a dedicated message in the instrument panel. If the low oil level is confirmed by a check using the dipstick, the level must be topped up to avoid damage to the engine. Oil level indicator fault This is indicated by the flashing of " OIL _ _" or by the display of a dedicated message in the instrument panel. Contact a PEUGEOT dealer or a qualified workshop. Dipstick Refer to the "Checks" section to locate the dipstick and the oil filler cap on your engine. There are 2 marks on the dipstick: The total mileage is displayed in zone A of the screen and the trip mileage in zone B . With the trip mileage displayed, press the button for a few seconds. Mileage recorder Trip recorder zero reset System which informs the driver whether the engine oil level is correct or not. This information is indicated for a few seconds when the ignition is switched on, after the service information. The level read will only be correct if the vehicle is on level ground and the engine has been off for more than 30 minutes. - A = max; never exceed this level, - B = min; top up the level via the oil filler cap, using the grade of oil suited to your engine. Oil level correct * Depending on version.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131