Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2013-2019 Owner's Manual Driving 6-speed electronic gearbox

Six-speed electronic gear control gearbox 854Driving 6-speed electronic gearbox which offers a choice between the comfort of fully automatic operation or the pleasure of manual gear changing. There are two driving modes: - automated mode for automatic control of the gears by the gearbox, - manual mode for sequential gear changing by the driver. In automated mode, it remains possible to change gear manually by using the steering mounted control paddles when required, when overtaking, for example. Gear lever R. Reverse . With your foot on the brake, lift the lever and push forwards. N. Neutral. With your foot on the brake, select this position to start. A. Automated mode. Move the lever backwards to select this mode. M. + / -. Manual mode with sequential gear changing. Move the lever to the left to select this mode, then: - push it forwards to change up, - or pull it backwards to change down. +. Change up paddle. Press the back of the "+" steering mounted paddle to change up a gear. -. Change down paddle. Press the back of the "-" steering mounted paddle to change down a gear. Steering mounted control paddles The steering mounted paddles cannot be used to select neutral, or to engage or disengage reverse gear. Do not drive with your hand resting on the gear lever as there is a risk of damaging the gearbox.
), ). 86Driving Engagement of reverse gear is accompanied by an audible signal. N flashes in the instrument panel, accompanied by an audible signal and a message in the instrument panel screen, if the gear lever is not in position N on starting. For optimum acceleration, for example when overtaking another vehicle, press the accelerator pedal firmly past the point of resistance. Display in the instrument panel Moving off Automated mode Gear lever positions N. Neutral R. Reverse 1, 2, 3, 4, 5, 6. Gears in manual mode AUTO. This comes on when the automated mode is selected. It switches off on changing to manual mode. Place your foot on the brakewhen this warning lamp is flashing (for example, when starting the engine). Select position N . Press the brake pedal down fully. Start the engine. N appears in the instrument panel screen. Select automated mode (position A ), AAmanual mode (position M ), or reverse (position R ). RR Release the parking brake. Take your foot off the brake pedal, then accelerate. AUTO and 1, 1 or R appears in the instrument panel screen. After starting the vehicle, select position Afor enter automated mode. AUTO and the gear engaged appear in the instrument panel screen. The gearbox is then operating in auto-active mode, without any action on the part of the driver. It continuously selects the most suitable gear, depending on the: - style of driving, - profile of the road. Foot on brake flashes on the instrument panel, accompanied by an audible signal and a message in the instrument panel screen, if the brake pedal is not pressed on starting.
At very low speed, if reverse gear 874Drivingis requested, this will only be taken into account when the vehicle is immobilised. A warning lamp appears in the instrument panel screen. Manual gear changing Manual mode On sharp acceleration, the gearbox will not change up unless the driver acts on the gear lever or the steering mounted paddles. Never select neutral N while the vehicle is moving. Only engage reverse gear R when the vehicle is immobilised with the brake pedal pressed. This selective gear change mode enables you to overtake, for example, while still remaining in automatic mode. Operate the + or - steering mounted control paddle. The gearbox engages the gear requested if the engine speed permits. AUTO is still displayed in the instrument panel. After a few moments without any action on the controls, the gearbox resumes automatic control of the gears. When the vehicle has moved off, select position M to change to manual mode. Pull the lever towards the + sign to change up a gear. Push the lever towards the - sign to change down a gear. The gears engaged appear successively in the instrument panel screen. The gear change requests are only carried out if the engine speed permits. It is not necessary to release the accelerator during gear changes. When braking or slowing down, the gearbox changes down automatically to permit acceleration in the correct gear.
88Driving Operating fault When immobilising the vehicle, with the engine running, you must place the gear lever in neutral N . Before carrying out any work in the engine compartment, check that the gear lever is in neutral N and that the parking brake is applied. With the ignition on, the flashing of this warning lamp and the flashing of AUTO , accompanied by an audible signal and a message in the instrument panel screen, indicates a malfunction of the gearbox. Have it checked by PEUGEOT or a qualified workshop. You must press the brake pedal firmly when starting the engine. Whatever the circumstances, you must manually apply the parking brake to immobilise the vehicle. Stopping the vehicle Before switching off the engine, you can choose to: - move to position N to engage neutral, - leave the gear engaged; in this case, it will not be possible to move the vehicle. In both cases, you must apply the parking brake to immobilise the vehicle.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131