Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2013-2019 Owner's Manual Driving 5-speed electronic gearbox

Five-speed electronically controlled gearbox 82Drivingwhich offers a choice between the comfort of automatic operation or the pleasure of manual gear changing. Three driving modes are offered: - automated mode for automatic control of the gears by the gearbox, without ant action by the driver, - manual mode for sequential changing of the gears by the driver, using the gear lever or the steering mounted control paddles, - auto sequential mode for overtaking, for example, remaining in the automated mode while using the functions of the sequential mode. 5-speed electronic gearbox Gear lever R. Reverse . With your foot on the brake, move the lever forwards to select this position. N. Neutral. With your foot on the brake, select this position to start the engine. A. Automated mode. Move the lever backwards to select this mode. M. + / - Manual mode with sequential gear changing. Move the lever backwards, then to the left to select this mode, then: - push forwards to change up a gear, - or push backwards to change down a gear. Steering mounted controls +. Change up paddle. Press the back of the steering wheel "+"paddle to change up a gear. -. Change down paddle. Press the back of the steering wheel "-"paddle to change down a gear. The steering mounted paddles do not permit the selection of neutral or the engaging and disengaging of reverse gear. Do not drive with your hand resting on the gear lever, as there is a risk of damaging the gearbox.
) or ) .834Driving Display in the instrument panel Gear lever positions N. Neutral R. Reverse 1, 2, 3, 4, 5. Gears in manuall mode AUTO. This comes on when the automated mode is selected. It switches off on changing to manual mode. Select position N . Press the brake pedal fully. Start the engine. Moving off N flashes in the instrument panel screen if the gear lever is not in position N on starting. Place your foot on the brakewhen this warning lamp flashes (e.g.: starting the engine). There is an audible signal on engagement of reverse. When moving off on a slope, accelerate gradually while releasing the parking brake. Select first gear (position M or A ) or AAreverse (position R ) .RR Release the parking brake. Progressively take your foot off the brake pedal, then move off. AUTO and 1 or R appear in the instrument panel. Stopping - Moving off on a slope When stopping on a slope, do not use the accelerator to immobilise the vehicle; apply the parking brake. Manual mode AUTO disappears and the gears engaged appear in succession in the instrument panel. After starting the vehicle, select position Mto change to manual mode. The gear change commands are only carried out if the engine speed permits. When driving at low speed, on approaching a stop sign or traffic lights for example, the gearbox changes down to first gear automatically. You must press the brake pedal firmly while starting the engine. Automated mode Following use of the sequential mode, select position A to return to the automated mode. AUTO and the gear engaged appear in the instrument panel. The gearbox then operates in auto-adaptive mode, without any action on the part of the driver. It continuously selects the most suitable gear for: - optimisation of fuel consumption, - the driving style, - the road conditions, - the vehicle load. N appears in the instrument panel.
appear in the instrument panel. 84Driving Never select neutral N while the vehicle is moving. Only engage reverse gear R when the vehicle is immobilised, with your foot on the brake pedal. In all cases, you must apply the parking brake to immobilise the vehicle. "Auto sequential" mode In the automated mode, you can resume control temporarily at any time using the steering mounted control paddles. The use of these paddles permits manual selection of the gears in situations which require a more rapid change-down than in the automated mode (arrival at a roundabout, leaving a car park with a steep gradient, overtaking...). The gearbox engages the required gear if the engine speed permits. AUTO remains displayed on the instrument panel. After a few moments, the gearbox resumes automatic control of the gears. Stopping the vehicle Before switching off the engine, you can change to position N to be in neutral. In this case, you must apply the parking brake to immobilise the vehicle. AUTO and - appear in the instrument panel. -- Operating fault With the ignition on, if this warning lamp comes on and AUTO flashes, accompanied by an audible signal and a message in the screen, this indicates a gearbox fault. Have it checked by a PEUGEOT dealer or a qualified workshop. For best acceleration, when overtaking another vehicle for example, press the accelerator pedal firmly to pass the point of resistance. Select position N . Press the brake pedal. Wait approximately 30 seconds until N or a gear appears in the instrument panel. Release the brake pedal. The gearbox is operational again. Reinitialisation Following disconnection of the battery, the gearbox must be reinitialised. Switch on the ignition.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131