Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2013-2019 Owner's Manual Comfort

573Comfort Front seats with manual adjustments Raise the control and slide the seat forwards or backwards. Pull the control upwards to raise or push it downwards to lower, as many times as required, to obtain the position required. Push the control rearwards. Forwards-backwards Height Seat backrest angle As a safety measure, seat adjustments should only be carried out when stationary. Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement immediately.
58Comfort To raise the head restraint, pull it upwards. To remove the head restraint, press the lug A and pull the head restraint upwards. To put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back. To lower the head restraint, press the lug Aand the head restraint at the same time. The head restraint is fitted with a frame with notches which prevents it from lowering; this is a safety device in case of impact. The adjustment is correct when the upper edge of the head restraint is level with the top of the head. Never drive with the head restraints removed; they must be in place and adjusted correctly. Head restraint height
593Comfort Rear seats Move the corresponding front seat forward if necessary. Check that the corresponding outer seat belt is positioned correctly against the backrest and buckle it. Place the head restraints in the low position. Straighten the seat backrest 2 and secure it. Check that the red indicator, located next to the control 1 , is no longer visible. Unbuckle and reposition the outer seat belt on the side of the backrest. When folding the seat, the centre seat belt should not be fastened, but laid out flat on the seat . Press control 1 to release the seat backrest 2 . Fold the seat backrest 2 on to the cushion 3 . Folding the backrest Repositioning the seat backrest Bench seat with fixed one-piece cushion and split backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot. When repositioning the seat backrest, take care not to trap the seat belts. The rear seat cushion does not fold, just the seat backrest can be folded to increase the boot loading space.
, pull the control lever to 60Comfort Steering wheel adjustment When stationary , pull the control lever to When stationaryWhen stationaryrelease the adjustment mechanism. Adjust the height and reach to suit your driving position. Push the control lever to lock the adjustment mechanism. As a safety precaution, these operations should only be carried out with the vehicle stationary. These have one position for use (up) and a stowed position (down). They can be removed and are interchangeable side to side. To remove a head restraint: pull the head restraint upwards to the stop, then, press the lug A . Rear head restraints Never drive with the head restraints removed; they must be in place and correctly adjusted.
613Comfort Mirrors Each fitted with an adjustable mirror glass providing the lateral rearward vision necessary for overtaking or parking. They can also be folded for parking in confined spaces. Door mirrors The objects observed are, in reality, closer than they appear. Take this into account in order to correctly judge the distance of vehicles approaching from behind. Demisting - Defrosting Adjustment Adjustment Manual model Folding When parked, fold the mirror manually to protect it. Unfolding Before moving off, unfold the mirror. Electric model Move the lever in all four directions to adjust the mirror. Move control A to the right or to the left to select the corresponding mirror. Move control B in all four directions to adjust. Return control A to the central position. Demisting-defrosting of the door mirrors operates with the engine running, by switching on the heated rear screen. For more information on demisting and defrosting the rear screen, refer to the corresponding section.
62!Comfort If the mirrors are folded using control A , they will not unfold when the vehicle is unlocked. Pull again on control A . The folding and unfolding of the door mirrors using the remote control can be deactivated by a PEUGEOT dealer or a qualified workshop. Fold the mirrors when putting your vehicle through an automatic car wash. Folding - Automatic: lock the vehicle using the remote control or the key. - Manual: with the ignition on, pull control Arearwards. Unfolding - Automatic: unlock the vehicle using the remote control or the key. - Manual: with the ignition on, pull control Arearwards. Automatic day/night model By means of a sensor, which measures the light from the rear of the vehicle, this system automatically and progressively changes between the day and night uses. Adjustable mirror providing a central rearward view. Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the driver caused by the sun, headlamps from other vehicles... Rear view mirror Manual day/night model Adjustment Adjust the mirror so that the glass is directed correctly in the "day" position. Day / night position Pull the lever to change to the "night" anti-dazzle position. Push the lever to change to the normal "day" position. In order to ensure optimum visibility during your manoeuvres, the mirror lightens automatically when reverse gear is engaged. As a safety measure, the mirrors should be adjusted to reduce the "blind spot". If necessary, it is possible to fold the mirrors manually.
633Comfort Ventilation Air intake flow The incoming air follows various paths depending on the controls selected by the driver: - direct arrival in the passenger compartment (air intake), - passage through a heating circuit (heating), - passage through a cooling circuit (air conditioning). Control panel The controls of this system are grouped together on control panel A on the centre console. 1. Windscreen demisting-defrosting vents. 2. Front side window demisting-defrosting vents. 3. Side adjustable air vents. 4. Central adjustable air vents. 5. Air outlets to the front footwells. 6. Air outlets to the rear footwells. Air distribution Air intake The air circulating in the passenger compartment is filtered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air recirculation mode.
In order for these systems to be fully effective, follow the operation and maintenance 64Comfortguidelines below: To obtain an even air distribution, take care not to obstruct the exterior air intake grilles located at the base of the windscreen, the nozzles, the vents and the air outlets, as well as the air extractor located in the boot. Do not cover the sunshine sensor, located on the dashboard; this is used for regulation of the air conditioning system. Operate the air conditioning system for at least 5 to 10 minutes, once or twice a month to keep it in perfect working order. Ensure that the passenger compartment filter is in good condition and have the filter elements replaced regularly. We recommend the use of a combined passenger compartment filter. Thanks to its special active additive, it contributes to the purification of the air breathed by the occupants and the cleanliness of the passenger compartment (reduction of allergic symptoms, bad odours and greasy deposits). To ensure correct operation of the air conditioning system, you are also advised to have it checked regularly as recommended in the warranty and maintenance record. If the system does not produce cold air, switch it off and contact a PEUGEOT dealer or a qualified workshop. When towing the maximum load on a steep gradient in high temperatures, switching off the air conditioning increases the available engine power and so improves the towing ability. Recommendations for ventilation and air conditioning If after an extended stop in sunshine, the interior temperature is very high, first ventilate the passenger compartment for a few moments. Put the air flow control at a setting high enough to quickly change the air in the passenger compartment. The air conditioning system does not contain chlorine and does not present any danger to the ozone layer. The condensation created by the air conditioning results in a discharge of water under the vehicle which is perfectly normal. Stop & Start The heating and air conditioning systems only work when the engine is running. To maintain a comfortable temperature in the passenger compartment, you can temporarily deactivate the Stop & Start system (see the corresponding section).
653Comfort Temperature adjustment Turn the dial from blue (cold) to red (hot) to adjust the temperature to your requirements. The air conditioning system only operates with the engine running. Air fl ow adjustment Turn the dial from position 1to position 6 to obtain a comfortable air flow. If you put the air flow control in position 0 (system off), the temperature is no longer controlled. However, a slight flow of air can still be felt, resulting from the movement of the vehicle. Manual air conditioning Heating / Ventilation 1. Temperature adjustment. 2. Air flow adjustment. 3. Air distribution adjustment. 4. Air intake/ air recirculation. 5. Air conditioning On / Off.
66Comfort Air conditioning On / Off It enables you to: - lower the temperature, in summer, - increase the effectiveness of the demisting in winter, above 3 °C. Switching on Press the "A/C" button, the button's indicator lamp comes on. Switching off Press the "A/C" button again, the button's indicator lamp goes off. Switching off may affect comfort levels (humidity, condensation). The air conditioning is designed to operate effectively in all seasons, with the windows closed. The air conditioning does not operate when the air flow adjustment control 2is in position " 0 ". To obtain cooled air more quickly, you can use recirculation of interior air for a few moments. Then return to fresh air intake. Air distribution adjustment Windscreen and side windows. Windscreen, side windows and footwells. Footwells. Central and side vents. The air distribution can be adapted by placing the dial in an intermediate position. Press the button to recirculate the interior air. The indicator lamp comes on to confirm this. Air intake / Air recirculation The recirculation of interior air insulates the passenger compartment from exterior odours and smoke. Return to exterior air intake as soon as possible to prevent deterioration of the air quality and the formation of mist. Press the button again to allow fresh air into the passenger compartment. The indicator lamp goes off to confirm this.
673Comfort Dual-zone digital air conditioning Automatic operation Automatic comfort programme Three modes are provided for the driver and for the front passenger to select their desired level of comfort in the passenger compartment. When the engine is cold, to prevent too great a distribution of cold air, the air flow will only reach its optimum level gradually. In cold weather, it favours the distribution of warm air to the windscreen, the side windows and the footwells only. Offers the best compromise between a comfortable temperature and quiet operation. Provides soft and quiet operation by limiting air flow. Provides strong and effective air flow. Press the "AUTO" button repeatedly. The indicator lamp comes on at the first press; the mode activated appears in the digital air conditioning screen:. 1. Automatic comfort programme. 2. Temperature adjustment on driver's side. 3. Temperature adjustment on passenger's side. 4. Automatic visibility programme. 5. Air conditioning On/Off. 6. Air distribution adjustment. 7. Air flow adjustment. 8. Air intake/ Air recirculation. The air conditioning can only operate with the engine running.
68Comfort A setting around 21 enables you to obtain an optimum level of comfort. Depending on your requirements, a setting between 18 and 24 is usual. In addition, it is recommended that you avoid a left/right setting difference of more than 3. On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no need to alter the value displayed in order to obtain the required level of comfort. The system corrects the temperature difference automatically and as quickly as possible. Automatic visibility programme For maximum cooling or heating of the passenger compartment, you can exceed the minimum value of 14 or the maximum value of 28. Push the switch 2 or 3 down until "LO" is displayed or up until "HI" is displayed. See "Front demisting-defrosting". Depending on your requirements, you can make a different selection from that offered by the system by changing a setting. The other functions will still be controlled automatically. Resuming manual control The air conditioning is designed to operate efficiently in all seasons, with the windows closed. Air conditioning On/Off It allows you: - in summer, to lower the temperature, - in winter, above 3 °C, to improve demisting. Switching on Press the "A/C" button, the associated indicator lamp comes on. The air conditioning cannot operate when the air flow is set to off. Switching off Press the "A/C" button again; the associated indicator lamp goes off. Switching off may cause some problems (humidity, misting). When you modify a setting, the indicator lamp in the "AUTO" button goes off. Press the "AUTO" button again to return to the automatic comfort programme. Temperature adjustment The driver and front passenger can each set the temperature to suit their requirements. The value indicated in the screen corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit. Press the button 2 or 3 down (blue) reduce the value or up (red) to increase it.
693Comfort Press this button several times in succession to direct the air flow in turn towards: Press this button to recirculate the interior air. The indicator lamp in the button comes on and the air recirculation symbol is displayed. Press the "empty fan" air flow button until the fan symbol disappears and "---" appears. Press this "full fan" button to increase the air flow. Press this "empty fan" button to reduce the air flow. Avoid prolonged operation in interior air recirculation mode (risk of misting and of deterioration of the air quality). Avoid driving for too long with the system switched off (risk of misting and of deterioration of the air quality). Pressing the "full fan" button reactivates the system with the settings prior to deactivation. Air distribution adjustment - the windscreen, the side windows and the footwells, - the windscreen and side windows (demisting or defrosting), - the central and side vents, - the central vents, the side vents and the footwells, - the footwells. Air fl ow adjustment The air flow symbol (a fan) appears in the screen. It is filled in progressively in relation to the value required. Air intake/Air recirculation Air recirculation prevents exterior odours and smoke from entering the passenger compartment. It is activated automatically when operating the screen wash. As soon as possible, press this button again to permit the intake of exterior air and prevent misting. The indicator lamp in the button goes off. Switching the system off This action switches off all of the functions of the air conditioning system. The temperature is no longer maintained at a comfortable level. However, a slight flow of air, due to the movement of the vehicle, can still be felt.
70Comfort Switch off the demisting/defrosting of the rear screen and door mirrors as soon as appropriate, as lower current consumption results in reduced fuel consumption. Front demist - defrost Rear screen demist - defrost The control button is located on the air conditioning system control panel. These markings on the control panel indicate the control positions for rapid demisting or defrosting of the windscreen and side windows. With manual air conditioning Switching on The rear screen demisting/defrosting can only operate when the engine is running. Press this button to demist/defrost the rear screen and (depending on version) the door mirrors. The indicator lamp associated with the button comes on. With Stop & Start, when demisting has been activated, the STOP mode is not available. Switching off The demisting/defrosting switches off automatically to prevent an excessive consumption of current. It is possible to stop the demisting/defrosting operation before it is switched off automatically by pressing the button again. The indicator lamp associated with the button goes off. With dual-zone digital air conditioning Automatic visibility programme Select this programme to demist or defrost the windscreen and side windows as quickly as possible. The system automatically manages the air conditioning, air flow and air intake, and provides optimum distribution towards the windscreen and side windows. To stop the programme, press either the "visibility" button again or "AUTO" , the warning lamp on the button goes off and the warning lamp in the "AUTO" button comes on. The system reverts to the previous settings. Put the air flow, temperature and distribution controls to the dedicated marked position. Press the "A/C" button for air conditioning; the indicator lamp in the button comes on.
/ Auxiliary socket713ComfortInterior fi ttings 1.Glove box (see details on the following page) 2.Open storage compartment (depending on equipment)3.12 V accessory socket(120 W) Observe the maximum power rating to avoid damaging your accessory. 4.USB port/ Auxiliary socket (see details on following pages) 5.Open storage compartments6.Cup holder7.Closed storage compartment8.Door pockets
Its lid has locations for a pair of glasses... 72Comfort 12 V accessory socket Glove box To open the glove box, raise the handle. It houses the front passenger's airbag deactivation switch A . If the vehicle is fitted with air conditioning, it provides access to the ventilation nozzle B , distributing the same conditioned air as the vents in the passenger compartment. It gives access to the fusebox (see "Changing a fuse"). To connect a 12 V accessory (maximum power: 120 Watts), lift the cover and connect a suitable adaptor.
type 733Comfort Additional USB port Depending on version, your vehicle may be fitted with a second USB port, located on the centre console. When in use, the USB port / Jack auxiliary socket must not be used to charge a portable device (risk of overload). USB port / Jack auxiliary socket This connection box, consisting of a JACK auxiliary socket and a USB port, is located on the centre console. It allows the connection of portable device, such as a digital audio player of the iPod ® type ®®or a USB memory stick. It reads the audio files which are transmitted to your audio system and played via the vehicle's speakers. You can manage these files using the steering mounted controls or the audio system control panel and display them in the instrument panel screen. When the USB port is used, the portable device charges automatically. For more information on the use of this system, refer to the "Audio equipment and telematics" section.
74Comfort Mats To remove the mat on the driver's side: move the seat as far back as possible, unclip the fixings, remove the mat. Removal Refitting To avoid any risk of jamming of the pedals: - only use mats which are suited to the fixings already present in the vehicle; these fixings must be used, - never fit one mat on top of another. The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control / speed limiter. To refit the mat on the driver's side: position the mat correctly, refit the fixings by pressing, check that the mat is secured correctly. Removable carpet protection.
753ComfortBoot fi ttings 1.Highload retaining net (depending on version) (see following page for details) 2.Luggage coverLuggage coverLuggage cover (see following page for details) 3.Boot lamp4.Retaining strap5.Stowing rings(depending on version)6.Retaining net
Rear parcel shelf 76Comfort This consists of two sections which can be folded back on each other. To store it, fold it on itself and place it at the bottom of the boot. To gain access to the boot from the rear seats: raise the front section of the rear parcel shelf using the grip A . High load retaining net Hooked onto the upper fixings and onto the lower rings or the lugs, this permits use of the entire loading volume up to the roof: - behind the rear seats (row 2), - behind the front seats (row 1) when the rear seats are folded. When positioning the net, check that the strap loops are visible from the boot; this will make slackening or tightening easier.
773Comfort Never use the ISOFIX ring intended for fixing the upper strap of child seat to the Top Tether. To use it in row 1: open the covers of the upper fixings 1 , unroll the high load retaining net, position one of the ends of the net's metal bar in the corresponding upper fixing 1 , then do the same with the other end, slacken the straps fully, fix the snap hook of each of the straps on the corresponding lug 3 , located under the bench seat cushion, fold the rear seats, tighten the straps without raising the bench seat, check that the net is hooked and tightened correctly. To use it in row 2: fold or remove the load space cover, open the covers of the upper fixings 2 , unroll the high load retaining net, position one of the ends of the net's metal bar in the corresponding upper fixing 2 , then do the same with the other end, attach the hook of each of the net's straps in the corresponding lower ring 4 , tighten the straps, check that the net is hooked and tightened correctly.
78Comfort Warning triangle (stowing) Before leaving your vehicle to set up and install the triangle, put on your high visibility vest. The dimensions of the triangle (once folded) or its storage box must be: - A : length = 438 mm, - B : height = 56 mm, - C : width = 38 mm. To use the triangle, refer to the manufacturer's instructions. Placing the triangle in the road The location for stowing a folded triangle or its box is under the front seat or under the boot carpet (depending on version). Distance from your vehicle (in metres)RoadMotorwayDayNight 50 m 80 m 150 m These are the internationally recognised values. Use the triangle in line with local driving regulations. The triangle is available as an accessory, contact a PEUGEOT dealer or a qualified workshop. Place the triangle at a distance behind the vehicle, as shown in the table below, according to the type of road and the level of ambient light.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131