Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2013-2019 Owner's Manual Audio equipment and telematics Touch screen

215ouch screen The system is protected in such a way that it will only operate in your vehicle. Touch screenTT 01 General operation For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary. When the engine is switched off and to prevent discharging of the battery, the system switches off following the activation of the energy economy mode. CONTENTS 02 First steps - Control panel 04 PEUGEOT CONNECT APPS 05 Navigation: navigation guidance, traffic, map, settings 06 Media: photos, radio, music, settings 07 Communication: bluetooth, contacts, call log, settings 08 Settings: system, vehicle, sound p. p. p. p. p. p. p. Frequently asked questions p. SATELLITE NAVIGATION SYSTEM MULTIMEDIA AUDIO SYSTEM BLUETOOTH TELEPHONE 216 217 220 219 238 254 264 270 03 Steering mounted controls p. 218
" 01216 These screens are the representation of a colour scheme. To change the colour scheme, refer to the " SETTINGS " section. Press MODE several times in succession for access to the following displays: " Trip computer " Trip computerTrip computer(refer to the "Instruments and controls" section) " Map " (if navigation guidance in progress) " Radio " (or audio source being listened to: CD, USB, Auxiliary) " Telephone " (if call in progress) OR GENERAL OPERATION In very hot conditions, the system may go into stand-by (screen and sound completely off) for a minimum period of 5 minutes. Use a fi nger in the areas offered in the screen. The screen is the "resistive" type. It is necessary to press fi rmly, particularly for "fl ick" gestures (scrolling through a list, moving the map...). A simple wipe will not be enough. Pressing with more than one fi nger is not recognised. The screen can be used when wearing gloves. This technology allows use under all temperatures.
21702MODE : selection of the type of permanent display. Volume adjustment (each source is independent, including "Traffi c announcements (TA)" and navigation instructions). Press to mute the sound. Selecting the " MAIN MENU ": - " Navigation " for navigation settings and to select a destination (depending on version). - " Media " to select radio, MP3 music (from a USB memory stick), view photos. - " Communications " to connect a telephone by Bluetooth so as to make telephone calls safely or to connect to the Internet. - " Settings " to enter settings for the radio, the vehicle or audio. Press MENU again to quit the " MAIN MENU " and return to the permanent display. Selecting the audio source (depending on version): - "FM" / "AM" / "DAB" * radio wavebands. - "USB" memory stick. - CD player (located in the glove box * on left hand drive, available as an accessory to be fi tted under the passenger seat on right hand drive). - Telephone connected by Bluetooth and Bluetooth multimedia distribution (streaming). - Media player connected to the auxiliary socket (jack, cable not supplied). To clean the screen, use a soft non-abrasive cloth (spectacles cloth) without any additional product. Do not use sharp objects on the touch screen. Do not touch the touch screen with wet hands. FIRST STEPS * Depending on equipment. MAIN MENU Following prolonged operation in sunny conditions, the volume may be limited to protect the system. The return to normal operation takes place when the temperature in the passenger compartment drops. Short cut: return to the screen showing the carousel of audio sources. Short cut: return to the radio screen.
03���218 - Press: mute / restore sound. - Increase volume. - Decrease volume. - Press: change the audio source: Radio, Media. - Rotation. Radio: automatic selection of next / previous frequency. Media: previous / next track. Menus: movement - Press. Radio: pre-set radio stations. Menus: confi rm. Audio source: confi rm selection - Incoming call: answer call. - Call in progress: Telephone menu (contacts, call log). End call. - Radio: display the list of stations. Media: display the list of albums / tracks. STEERING MOUNTED CONTROLS
04219PEUGEOT CONNECT APPS The applications use vehicle data such as the current speed, mileage, remaining fuel range or even GPS position to provide pertinent information. Plug the "PEUGEOT CONNECT APPS" connection key into the USB port. The "MyPeugeot" application is a link between the user, the manufacturer and the dealer network. It allows the customer to know everything about their vehicle: servicing, accessory range, service contracts taken out. It also makes possible the sending of the vehicle's mileage to the "MyPeugeot" site, or to identify a dealer. PEUGEOT CONNECT APPS is a service that delivers real-time driving assistance applications giving access to useful information such as the state of the traffi c, risk areas, fuel prices, the availability of parking places, tourist sites, weather conditions, correct addresses… It includes access to the mobile network related to the use of the applications. "PEUGEOT CONNECT APPS" is provided by a subscription taken out with a PEUGEOT dealer, available according to country and the type of touch screen; it can also be taken out after handover of the vehicle. For safety reasons, some functions can only be used when stationary. Using "Plug & Play", the key is recognised automatically and allows display of the interface giving access to the applications.
22005 To use the telephone functions, refer to the " Communications " section. "Navigation" For managing contacts and their addresses, refer to the " Communications " section. NAVIGATION Main menuNavigationRoute calculationEnter addressContactsRoute optionsLevel 1Level 2Level 3
221Level 1Level 2Level 3CommentsNavigationGPS NavigationGuideRoute calculation Fastest Choose the navigation criteria. The map displays the route chosen according to these criteria. Shortest Time/Distance compromise Include toll roads Include ferries Pass close to waypoints Choose from the list of recent destinations. Itinerary Start navigation Display the map and start navigation. AddressEnter address Curr. location Address settings. Points of Interest Town centre As waypoint Save Save the current address. Calculate the route After choosing the address, start the route calculation. Contacts Navigate to After choosing a contact in the list, press to calculate the route. From map Display the map and zoom to view the roads. Waypoints Create, add or delete a waypoint or view the itinerary. SettingsRoute options Calculation criteria Retain the calculation criteria in memory. Diversion Detour from your initial route by a certain distance. Risk areas Activate the risk areas alert. Voice synthesis Choose the volume for voice and announcement of street names. Map Mapping version. Confi rm Save the options.
05 Moving between the two menus. NAVIGATION Level 1Level 2Level 3 "Navigation" Traffi cPoints of interest on the mapPoints of interest on the mapAudio settingsTraffi c information optionsMap headingMap colourMain menuMain menu222
223223223Level 1Level 2Level 3CommentsNavigationTraffi cAlong the route Refi ne the list of traffi c information on the itinerary, within a radius of 30 miles (50 km) or at the destination. NearAroundRead messageAudio settings Criteria Setting choices. Diversion Risk areas Voice Choose the volume for the voice and announcement of street names. Maps Confi rm Save the options. SettingsTraffi c info options Along the route Set the choice for messages and the fi ltering radius. Near Around Read message Settings Confi rm Save the options. Confi rm Save the settings. NavigationMapPoints of interest on the mapMap heading Choose the display and orientation of the map. Map colour Choose the display of the map. Points of Interest List of categories available. After choosing the category, select the points of interest. Confi rm Save the settings.
". 05224 Towards a new destination Choosing a destination Select " Navigation GPS ". Select " Save " to save the address entered as a contact entry. The system allows up to 200 entries. Select " Confi rm " or press the screen (blue arrow) to start navigation guidance. Select " Address ". Select the " Country: " from the list offered then in the same way: the " City: " or its post code, the " Road: ", the " N°/:° ". Confi rm each time. Select " Guide ". Choose the restriction criteria: " Tollroads ", " Ferries ", " Near ". NearNear Choose the navigation criteria: " Fastest " or the " Shortest " or " Time/Distance compromise ". The route is displayed in the map (on the right). To delete navigation information, press on " Settings " then " Stop navigation ". To restore the navigation information press on " Settings " then " Restart navigation ". Press MENU to display the " MAIN MENU " then select " Navigation ". NAVIGATION - GUIDANCE
05225 Towards one of the recent destinations Towards a contact in the directory Navigation towards a contact imported from a telephone is only possible if the address entered is compatible with the system. Select " Navigation GPS ". Select an address from the list offered. Select " Navigation GPS ". Select " Contacts ". Select a destination from the contacts in the list offered. Select " Navigate to ". Select the criteria then " Confi rm " to start guidance. Select " Guide ". Select the criteria then " Confi rm " or press the screen (blue arrow) to start guidance. Press MENU to display the " MAIN MENU " then select " Navigation ". Press MENU to display the " MAIN MENU " then select " Navigation ". NAVIGATION - GUIDANCE
05 Towards GPS coordinates Towards a point on the map Select " Navigation GPS ". Select " Address ". Enter the " Longitude: " then the " Latitude: ". Select " Guide ". Select the criteria then " Confi rm " or press the screen (blue arrow) to start guidance. Select " Navigation GPS ". Select " From map ". Zoom in on the map then select the point. Press MENU to display the " MAIN MENU " then select " Navigation ". Press MENU to display the " MAIN MENU " then select " Navigation ". A long press displays the surrounding tourist attractions. NAVIGATION - GUIDANCE 226
" or " 05227 Towards points of interest (POI) Points of Interest (POI) show all of the locations of services nearby (hotels, retail outlet, airports, ...). Select " GPS Navigation ". Select " Address ". Select " Pts of Interest ". Select a category from the list offered (the categories are presented on following pages). Select " Along the route " or " Near " or " NearNearAt a destination " or " At an address " to fi lter the points of interest. Select a point of interest from the list offered. Select " Guide ". Select the criteria then " Confi rm " to start guidance. Select " Search ". or Select a point of interest from the list offered. Press MENU to display the " MAIN MENU " then select " Navigation ". NAVIGATION - GUIDANCE
05228 List of main points of interest (POI) An annual mapping update allows new points of interest to be presented to you. You can also update the Risk areas / Danger areas every month. The detailed procedure is available on: http://peugeot.navigation.com. Public transport Rest areas Shopping centres Business centres Service stations Hotels Restaurants NAVIGATION - GUIDANCE
05 These functions are only available if risk areas have been downloaded and installed on the system. Select " Navigation GPS ". Select " Settings ". Select " Risk areas ". Risk area settings It is then possible to activate risk area alerts, then choose: - "With audible alert" - "Warnings only when navigating" - "Alert setting": the choice of timing allows the time before giving a speed camera alert to be defi ned. Select " Confi rm ". Press MENU to display the " MAIN MENU " then select " Navigation ". NAVIGATION - GUIDANCE 229
05230 Adding a waypoint Organising waypoints Select " Navigation GPS ". Select " Waypoints ". Select " Add ". The address of the waypoint is entered in the same way as a destination, so enter the " City: " or post code, the " Road: " and the " N°/: ". Confi rm each time. Then select " As waypoint ". Select the waypoint that you want to move in the order. To organise waypoints, carry out the previous operations 1 to 3 again (Adding a waypoint). Select " Up ". Select " Down ". Select " Delete ". Select " Road map " to view the changes made to the route. Select " Guide ". Select the criteria then " Confi rm " to start guidance and give the general direction of the navigation route. Press MENU to display the " MAIN MENU " then select " Navigation ". NAVIGATION - GUIDANCE Select " Address ".
05231 Route options Calculation criteria Select " Navigation GPS ". Select " Settings ". Select " Criteria ". It is then possible to choose: - the navigation criteria: " Fastest ", " Shortest ", " Time/Distance compromise ", - the exclusion criteria: " Include tollroads ", " Include ferries ", " Pass close to waypoints ", " Take traffi c into account ". Select " Confi rm ". Press MENU to display the " MAIN MENU " then select " Navigation ". NAVIGATION - GUIDANCE
", " 05232 Traffic information Select " Traffi c ". Press MENU to display the " MAIN MENU " then select " Navigation ". Select the message from the list offered. Select " Map " or " Details " for more information. Set the " Along the route ", " Near ", " NearNearAround " fi lters to fi ne-tune the list. Press again to remove the fi lter. Select " Settings ". Select: - " Warn of new messages ", - " Traffi c messages only ", - " All messages ". Then enter the fi lter radius. Press MENU to display the " MAIN MENU " then select " Navigation ". Select " Traffi c ". Display of messages Setting the fi lters We recommend a fi lter radius of: - 12 miles (20 km) in urban areas, - 30 miles (50 km) on motorways. TMC (Traffi c Message Channel) messages contain information on traffi c and weather conditions, received in real time and transmitted to the driver in the form of audible announcements and symbols on the navigation map. Select " Confi rm ". TRAFFIC
Modifi ed signs Risk of explosion Narrow carriageway Road closed Slippery surface Demonstration Accident Danger Delay No entry Roadworks Traffi c jam Weather reports Traffi c reports Wind Fog Parking Snow / ice 05233 Red and yellow triangle: traffi c information, for example: Main traffi c symbols Black and blue triangle: general information, for example: Receiving TA messages Select " TA ". Press the MODE until the " RADIO " display is obtained. Select " Traffi c announcements (TA) ". Select " Confi rm ". The TA (Traffi c Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffi c report is transmitted, the current audio source (Radio, CD, USB, ...) is interrupted automatically to play the TA message. Normal playback of the audio source resumes at the end of the transmission of the message. TRAFFIC
05 Diversion from a route Press from MENU to display the " MAIN MENU " then select " Navigation ". Select " Navigation GPS ". Select " Settings ". Select " Diversion ". Select the diversion distance by pressing + or -. Select " Recalculate route ". The route will be modifi ed in time and distance. Select " Confi rm ". The route may be diverted following the reception of a traffi c information message. TRAFFIC 234
05235 Map management Selecting the points of interest displayed on the map Select " Map ". Select " Points of Interest ". Select the points of interest from the list for them to be displayed in the screen. Select a category from the list offered (the categories are given on previous pages). Select " Confi rm ". Press MENU to display the " MAIN MENU " then select " Navigation ". MAP
". 05 Map orientation Select " Map ". Select " Map heading ". Select: - " Flat map view " to display the map in 2D, - " Perspective map view " to display a perspective view. With " Flat map view ": - " North heading " to keep the map always North up, - " Vehicle heading " to have the map follow the direction of travel, Street names are visible on the map from the 100 m scale. Map colour Select " Map colour ". Map colourMap colour Select: - " Automatic day/night mode " to have the brightness of the map adjusted automatically according to the ambient light level, using the vehicle's sunshine sensor, - " Map in day mode " to have the map always in day mode, - " Map in night mode " to have the map always in night mode. Then " Confi rm " to save the modifi cations. Press MENU to display the " MAIN MENU " then select " Navigation ". Select " Map ". Press MENU to display the " MAIN MENU " then select " Navigation ". MAP Then " Confi rm " to save the modifi cations. 236
23705 Navigation speech synthesis Volume / Street names Select " Audio ". Select " Voice ". Adjust " Voice synthesiser volume " and/or " State street names " (spoken during navigation guidance). Select " Confi rm ". Press MENU to display the " MAIN MENU " then select " Settings ". SETTINGS
23806 MEDIA Level 1Level 2Level 3Radio stationRadio stationMusicSelect a location for:Radio optionsGuidance optionsMain menu Media
239Level 1Level 2Level 3CommentsMediaRadioRadio stationFrequency Enter the desired radio frequency. Update Update the list of stations received. Memory Bookmark Press a radio station to select it. Music News Audio settings Adjust the sound distribution in the vehicle. SettingsRadio options Alternative frequencies (RDS) Activate or deactivate options. Radio text data display (TXT) DAB-FM automatic station tracking Traffi c warnings (TA) Traffi c reports and transport fl ashes News and sport programming Newsfl ashes and special events Confi rm Save the options. Confi rm Save the settings. MediaMusicFolder Press twice on the folder to go down a level. Press or the Back button to go up a level. PlaylistGenreSettings Adjust the sound distribution in the vehicle. Guidance options Random (all tracks): Choose the play settings. Random (current album): Loop: Auxiliary source amplifi cation: Music / Album selection Choose an album using the sleeve art which is displayed. Confi rm Save the settings.
06 MEDIA Level 1Level 2Level 3 Media Main menuPhotosPhoto selection240
241Level 1Level 2Level 3CommentsMediaPhotoPhotosFull screen Display the selected photo full screen. Rotate Turn the photo 90°. Select all Select all the photos in the list. Press again to deselect them. Slideshow Previous photo. Display the photos in turn full screen. Pause / Play. Next photo. Confi rm Save the settings.
06 Selecting a station The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode. This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system. Select " Radio ". Press MENU to display the " MAIN MENU " then select " Media ". Select a radio station from the list offered. If necessary, select changing the source. Press the MODE button until RADIO is displayed. Select " FM Radio " or " AM Radio ". OR Select " Update " to refresh the list. RADIO 242
06243 Changing a radio frequency By alphabetical list Press the current radio band then choose the radio station from the list offered. By automatic frequency search Press or to move the cursor for an automatic search down or up for a radio frequency. Select changing source. By manual frequency search Press " Frequency ", then enter the frequency using the keypad and confi rm. Select " Radio ". Press MENU to display the " MAIN MENU " then select " Media ". Select " FM Radio " or " AM Radio ". OR RADIO
06 Presetting a station From the permanent display, press " Memory ". Select a radio station or frequency (refer to the corresponding section). Select a number in the list to preset the previously chosen radio station. A long press on this number presets (memorises) the station. Recall pre-set stations Press MENU to display the " MAIN MENU " then select " Media ". Select " Radio ". RADIO Select " Memory ". 244
06245 Activating / Deactivating RDS Select " RDS ". Press the MODE button until the RADIO / MEDIARADIO / MEDIARADIO / MEDIAdisplay is obtained. Select Alternative frequencies (RDS) . Select Confi rm . RDS, if activated, allows you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the entire country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey. RADIO
06246 Display of options: if active but not available, the display will be greyed out, if active and available, the display will be highlighted. Display the name and number of the multiplex service being used. Preset stations, buttons 1 to 15. Short press: select the preset radio station. Long press: preset a radio station. Display of "Radiotext" for the current station. Select the audio source. Display the "DAB" band. Display of the name of the current station. If the "DAB" radio station being listened to is not available on "FM", the "DAB FM" option is greyed out. Any thumbnail broadcast by the station. Next radio station. Next "Multiplex". Previous "Multiplex". Previous radio station. Presentation of the radio station. RADIO
06247 If "DAB / FM auto tracking" is activated, there is a difference of a few seconds when the system switches to "FM" analogue radio with sometimes a variation in volume. When the digital signal is restored, the system automatically changes back to "DAB". Select " RADIO ". Press MENU to display the " MAIN MENU " then select " Media ". Select the radio in the list offered. Select change of source. Select " DAB Radio ". Digital radio provides higher quality reception and also the graphical display of information for the radio station. The different "multiplexes" provide you with a choice of stations displayed in alphabetical order. Press MENU to display the " MAIN MENU " then select " Media ". Select " RADIO ". Select " Settings ". Select " DAB-FM automatic station tracking " then " Confi rm ". "DAB" does not cover 100% of the territory. When the digital radio signal is weak, "DAB / FM auto tracking" allows you to continue listening to the same station, by automatically switching to the corresponding "FM" analogue station (if there is one). If the "DAB" station being listened to is not available on "FM" (" DAB/FM " option greyed out), or "DAB / FM auto tracking" is not activated, the sound will cut out while the digital signal is too weak. RADIO Digital radio - DAB / FM automatic station tracking DAB (Digital Audio Broadcasting) Digital radio
06248 CD, MP3 CD, USB player, auxiliary input Insert the CD in the player, insert the USB memory stick in the USB player or connect the USB peripheral to the USB port using a suitable cable (not supplied) The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the fi rst connection. Reduce the number of non-music fi les and the number of folders to reduce the waiting time. The playlists are updated every time the ignition is switched off or connection of a USB memory stick. However, the system memorises these lists and if they are not modifi ed, the loading time will be shorter. Selection of source The steering mounted SRC (source) button can be used to go to the next media source, available if the source is active. Press the OK button to confi rm the selection. " CD / CD MP3 " " USB, iPod " " Bluetooth (streaming) " " Auxiliary " " Radio " Select changing source then choose the source. Press the MODE button until the RADIO / MEDIA display is obtained. It is also possible to change source from the top bar. MUSIC
devices or Apple players players) player USB cables are used to 06249 CD, MP3 CD / USB player The audio equipment will only play audio fi les with ".wma, .aac, .fl ac, .ogg and. mp3" fi le extensions and with a bit rate of between 32 Kbps and 320 Kbps. It also supports VBR (Variable Bit Rate) mode. No other type of fi le (.mp4...) can be played. WMA fi les must be of the standard wma 9 type. The sampling rates supported are 11, 22, 44 and 48 KHz. It is advisable to restrict fi le names to 20 characters, without using of special characters (e.g.: " " ? ; ù) to avoid any playing and displaying problems. In order to be able to play a recorded CDR or CDRW, when recording it is preferable to select the ISO 9660 level 1, 2 or Joliet standard. If the disc is recorded in another format it may not be played correctly. It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible (4x maximum) for optimum sound quality. In the particular case of a multi-session CD, the Joliet standard is recommended. Information and advice The system supports USB mass storage devices, Blackberry ® devices or Apple ®®® players ®®via the USB port. The adaptor cable is not supplied. Control of the peripheral device is with the audio system controls. Other peripherals, not recognised on connection, must be connected to the auxiliary socket using a Jack cable (not supplied). In order to be read, a USB memory stick must be formatted FAT 16 or 32. MUSIC The system does not support the operation of two identical devices connected at the same time (two memory sticks, two Apple ® players) ®®but it is possible to connect one memory stick and one Apple ® player ®®at the same time. It is recommended that offi cial Apple ® USB cables are used to ®®ensure correct operation.
06// Selecting a track to play Previous track. Next track. Previous folder. Next folder. Pause. List of USB or CD tracks and folders. Up or down in the list. Confi rm, next menu level. Up one menu level. MUSIC 250
player to the USB port player. 06251 Audio streaming Streaming allows audio fi les on your telephone to be played via the vehicle's speakers. Connect the telephone: see the " Communications " section, then " Bluetooth ". Choose the " Audio " or " All " profi le. If play does not start automatically, it may be necessary to start the audio playback from the telephone. Control is from the peripheral device or by using the audio system buttons. Once connected in streaming mode, the telephone is considered to be a media source. It is recommended that you activate " Repeat " on the Bluetooth peripheral. Connecting APPLE ® players Connect the Apple ® player to the USB port ®®using a suitable cable (not supplied). Play starts automatically. Control is via the audio system. The classifi cations available are those of the portable device connected (artists / albums / genres / playlists / audiobooks / podcasts). The default classifi cation used is by artist. To modify the classifi cation used, return to the fi rst level of the menu then select the desired classifi cation (playlists for example) and confi rm to go down through the menu to the desired track. Copies of photos and album artwork are not compatible with the audio system. These appear only with a USB memory stick. MUSIC The version of software in the audio system may not be compatible with the generation of your Apple ® player. ®® The list of devices compatible with software versions is available from PEUGEOT dealers.
source. 06 Using the auxiliary input (AUX) (cable not supplied) Connect the portable device (MP3 player…) to the auxiliary JACK socket using an audio cable. First adjust the volume of your portable device (to a high level). Then adjust the volume of your audio system. Display and management of the controls are via the portable device. Select changing the source. Press the MODE button until the RADIO display is obtained. Select the AUXILIARY source. AUXILIARYAUXILIARY MUSIC 252
", " system) Sound Staging. software installed in your audio system processes 06253 - " Ambience " (choice of 6 musical ambiences) - " Bass " - " Treble " - " Loudness " (Activate/Deactivate) - " Balance " (" Driver ", " DriverDriverAll passengers ", " Front speakers only ") The audio settings ( Ambience , Bass , Treble and Loudness ) are different and independent for each sound source. The settings for distribution and balance are common to all sources. The distribution (or spatialisation using the Arkamys© system) ©©of sound is an audio process that allows the audio quality to be adapted to the number of listeners in the vehicle. On-board audio: Arkamys © Sound Staging. ©©With Sound Staging, the driver and passengers are immersed in an "audio scene" recreating the natural atmosphere of an auditorium: truly a part of the scene and its surroundings. This new sensation is made possible by software in the audio system which processes the digital signals from the media players (radio, CD, MP3…) without changing the audio settings. This processing takes account of the characteristics of the passenger compartment to produce optimum results. The Arkamys© software installed in your audio system processes ©©the digital signal from the media players (radio, CD, MP3, ...) and recreates a natural musical scene, with harmonious placement of instruments and voices in the space in front of passengers, level with the windscreen. Audio Select " Audio ". Press MENU to display the " MAIN MENU ", then select " Preferences ". Select " Ambience " or " Balance ". SETTINGS
07254 COMMUNICATION Level 1Level 2Level 3 Communications ContactsCall logCall logContacts managementDirectory statusMain menu
255Level 1Level 2Level 3CommentsCommunicationsContactsSee contacts Map Press a number to start a call or on the address to start navigation. Info Call log Consult the Call log and the contacts saved in the vehicle. ConsultKeypad Enter a number using the keypad. Guide Start navigation towards the selected contact, using their address. Call Keypad "Micro OFF": switches off the microphone temporarily so that your contact cannot hear your conversation with a passenger. "Privacy mode": switch to your mobile for a private conversation or to leave the vehicle without ending the call. "Swap": change contact while maintaining the current contact. "Conference": accept the incoming call to allow communication between all. Micro OFF Privacy mode Contacts Enter a number using the keypad. Swap Conference call CommunicationsCall logConsultContacts management New Create a new contact. Modify Modify the displayed contact. Delete Delete the displayed contact. Delete Delete all information on the displayed contact. Status Used or free contacts, percentage used of internal directory and Bluetooth contacts. Call After making choices, start the call. Add contact Add a new contact. Contacts After making choices, start the call. KeypadCall
07 During a call (short cut menu). or COMMUNICATION Level 1Level 2Level 3Bluetooth (devices)Bluetooth (devices)CallBluetooth connectionsMain menuCommunications256
257Level 1Level 2Level 3CommentsCommunicationsBluetoothBluetooth (devices)Connect Telephone Connect/disconnect the selected telephone. Audio Streaming Internet Search All profi les Start the search for another peripheral . Telephone (hands free) Audio Streaming Delete Delete the selected telephone. Update Import the contacts from the selected telephone to store them in the audio system. Settings / Bluetooth connections Bluetooth settings. Confi rm Save the settings. CallCall Enter a number using the keypad. Then press to start the call. Contacts List of contacts. Hang up Hang up the current call. Swap / Conference call Change contact while maintaining the current contact. Accept the incoming call and allow communication with all. Micro OFF Switch off the microphone temporarily. Privacy mode Switch to your mobile for a private conversation. Quit Quit this menu.
07258 The " Hands-free " profi le should be used in preference if "Streaming" is not desired. The ability of the system to connect with only one profi le depends on the telephone. The two profi les may both connect by default. Pairing a Bluetooth telephone First connection For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio unit must be carried out with the vehicle stationary . Select " Bluetooth ". Press MENU to display the " MAIN MENU " then select " Communications ". Select Search . The list of peripherals detected is displayed. Activate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone confi guration). The system offers to connect the telephone: - in " All profi les " (for selection of both profi les). - in " Telephone (hands free) " profi le (telephone only), - in " Audio Streaming " profi le (streaming: playing music fi les on the telephone), Select and confi rm. Select the name of the desired peripheral from the list and Confi rm . Visit www.peugeot.co.uk for more information (compatibility, additional help, ...). BLUETOOTH
07259 Then accept automatic connection on the telephone to allow the telephone to reconnect automatically every time the vehicle is started. Depending on the type of telephone, the system will ask you to accept or not the transfer of your contacts. The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you. On return to the vehicle, the last telephone connected automatically reconnects, within around 30 seconds after switching on the ignition (Bluetooth activated and visible). To modify the automatic connection mode, remove the pairing and pair the telephone again with the desired mode. Choose a code for the connection then " Confi rm ". Enter the same code on the telephone then accept the connection. The telephone is added to the list. BLUETOOTH If not, select " Update ".
07 Receiving a call An incoming call is announced by a ring and a superimposed display in the screen. Make a short press on the steering mounted TEL button to accept an incoming call. Make a long press on the steering mounted TEL button to reject the call. or Managing paired telephones Press MENU to display the " MAIN MENU " then select " Communications ". Select " Bluetooth ". Select the name of the peripheral in the list. Select: - " Connect " or " Disconnect " to connect or disconnect the Bluetooth connection with the peripheral selected. - " Delete " to remove it from the list. Select " Settings " for Bluetooth visibility, automatic call acceptance, importing contacts. BLUETOOTH Select " End call ". 260
07261 Press MENU to display the " MAIN MENU " then select the telephone. Calling a new number Calling a contact Making a call Use of the telephone is not recommended while driving. We recommended that you park safely or make use of the steering mounted controls. Select " Contacts ". Press MENU to display the " MAIN MENU " then select " Communications ". Select " Keypad ". Enter the phone number using the keypad then " Call " to start the call. Shortcut: Press MENU to display the " MAIN MENU " then select the telephone. Select " Contacts ". Select the desired contact from the list offered. Select the mobile or home line in the " Info " section. Select " CALL ". CONTACTS Select or enter a number and then press " Call " to start the call. Or make a long press on the steering mounted TEL button.
07262 Calling a recently dialled number Ending a call It is always possible to make a call directly from the telephone; park the vehicle fi rst as a safety measure. Select " Call log ". Press MENU to display the " MAIN MENU " then select " Communications ". Select the desired contact from the list offered. Or make a long press on the steering mounted TELTELTELbutton. or Select the telephone in the screen. or CALL LOG Press the MODE button until the TELEPHONEdisplay is obtained. Select " End call ".
07263 Ringtones Select " Audio ". Press MENU to display the " MAIN MENU " then select " Preferences ". Select " Ringtones ". You can select the ringtone used and adjust its volume. Select " Contacts ". Press MENU to display the " MAIN MENU " then select " Communications ". Select " Files ". Select: - " New " to add a new contact. - " Modify " to edit the selected contact. - " Delete " to delete the selected contact. - " Delete all " to delete all of the information for the selected contact. Select " Confi rm ". Select " Directory information " for the number of entries used, available, ... Managing contacts / entries SETTINGS
08264 SETTINGS Level 1Level 2Level 3System settingsSystem settingsMain menu Settings System settings
265Level 1Level 2Level 3CommentsSettingsSystem confi gurationSystem settingsBrightness Turn off screen Set the brightness. Adjust daytime brightness: Animations and scrolling: Skins Change the environment. Languages Select the language. Date & Time GPS Synchronisation: Set the date and time. Time format: Other Continue with other system settings Units Set the units for the display of distance, fuel consumption and temperature Delete data Select the desired data in the list then press Delete. Settings Factory settings. Confi rm Save the settings.
08 SETTINGS Level 1Level 2Level 3Vehicle confi gurationVehicle confi gurationSound settingsVehicle diagnosticsMemorisedspeedsSoundsMain menuMain menu Settings SpeedAudio settings266
267Level 1Level 2Level 3CommentsSettingsVehicle settingsVehicle confi gurationDriving assistance Choose from the categories, if no family is chosen, the complete list of functions is displayed. AccessLightingDiagnostics / Vehicle diagnostics List of faults detected (according to version). Speeds Activate With the speed(s) checked, press to store these speeds. Press again to deactivate. Select all Select or deselect all speeds. Deselect all Values Programme the speeds with the default values. Modify Modify the selected speed. Confi rm Save the options. Confi rm Save the settings. SettingsSoundsettingsAmbience Bass Choose the audio ambience. Treble Loudness Balance Set the position of the sound in the vehicle using the Arkamys system. Effects Choose the volume or activate it according to vehicle speed. Ringtones Ringtone Choose the ringtone and volume when the telephone rings. Ringtone volume: Voice synthesis Chose the volume for the voice and announcement of street names. Confi rm Save the settings.
" to display the other settings. 08 Modifying system settings System Select " System confi guration ". Press MENU to display the " MAIN MENU " then select " Preferences ". Select " Other " to display the other settings. OtherOther Select: - " Brightness " to switch off the screen or adjust the brightness. - " Languages " to change the language. - " Units " to change the units used for distance, fuel consumption and temperature. - " Date & Time " to change the time zone, synchronisation with GPS, time and its format and then the date. Select " Factory settings " to return to the original settings. Select " Delete data " to delete the list of recent destinations, personal points of interest, contacts in the list. Choose the item then select " Delete ". Select " Recent destinations " then press on " Delete " and confi rm with the message. SETTINGS 268
08269 Vehicle Modifying its settings Select " Vehicle ". Press MENU to display the " MAIN MENU " the select " Preferences ". Select " Confi rm " to save the settings. Choose the setting from the list to see its description and, depending on version, modify the setting. Then select the setting to activate it. Select " Driving " and/or " Access " and/or " Lighting " to fi lter the categories. Deselect all to have the complete list. SETTINGS
The following table groups together the answers to the most frequently asked questions concerning your audio system. FREQUENTLY ASKED QUESTIONS 270QUESTIONANSWERSOLUTIONNavigation, guidance The route calculation is not successful. The guidance criteria may confl ict with the current location (exclusion of toll roads on a toll motorway). Check the guidance criteria on the Navigation Menu, "Guidance options"\ "Defi ne calculation criteria". I am unable to enter my post code. The system only accepts post codes of up to 5 characters. The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs. The risk areas audible warning does not work. The audible warning is not active. Activate audible warnings in the Guidance options menu, "Navigation - guidance", "Set parameters for risk areas". The system does not suggest a detour around an incident on the route. The guidance criteria do not take account of TMC messages. Select the "Traffi c info" function in the list of guidance criteria. I receive a Risk area alert which is not on my route. Other than guidance, the system announces all Risk areas positioned in a cone located in front of the vehicle. It may provide an alert for a Risk area located on nearby or parallel roads. Zoom in on the map to view the exact position of the Risk area. Select "On the route" to no longer receive alerts other than guidance or to reduce the time for the announcement.
FREQUENTLY ASKED QUESTIONS 271QUESTIONANSWERSOLUTION Certain traffi c jams along the route are not indicated in real time. On starting, it is several minutes before the system begins to receive the traffi c information. Wait until the traffi c information is being received correctly (display of the traffi c information icons on the map). The fi lters are too restrictive. Modify the "Geographic fi lter" settings. In certain countries, only major routes (motorways...) are listed for the traffi c information. This phenomenon is normal. The system is dependent on the traffi c information available. The altitude is not displayed. On starting, the initialisation of the GPS may take up to 3 minutes to receive more than 4 satellites correctly. Wait until the system has started up completely. Check that there is a GPS coverage of at least 4 satellites (long press on the SETUP button, then select "GPS coverage"). Depending on the geographical environment (tunnel...) or the weather, the conditions of reception of the GPS signal may vary. This phenomenon is normal. The system is dependent on the GPS signal reception conditions. Telephone, Bluetooth I cannot connect my Bluetooth telephone. The telephone's Bluetooth function may be switched off or the telephone may not be visible. - Check that your telephone's Bluetooth function is switched on. - Check in the telephone settings that it is "visible to all". The Bluetooth telephone is not compatible with the system. You can check the compatibility of your telephone at www.peugeot.co.uk (services). The volume of the telephone connected in Bluetooth mode is inaudible. The volume depends both on the system and on the telephone. Increase the volume of the audio system, to maximum if required, and increase the volume of the telephone if necessary. The ambient noise level has an infl uence on the quality of telephone communication. Reduce the ambient noise level (close the windows, reduce the booster fan speed, slow down, ...).
FREQUENTLY ASKED QUESTIONS 272QUESTIONANSWERSOLUTION Some contacts are duplicated in the list. The options for synchronizing contacts are synchronizing the contacts on the SIM card, the contacts on the telephone, or both. When both synchronizations are selected, some contacts may be duplicated. Select "Display SIM card contacts" or "Display telephone contacts". Contacts are not shown in alphabetical order. Some telephones offer display options. Depending on the settings chosen, contacts can be transferred in a specifi c order. Modify the display setting in the telephone directory. The system does not receive SMS text messages. The Bluetooth mode does not permit sending SMS text messages to the system. CD, MP3 The CD is ejected automatically or is not played by the player. The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play. - Check that the CD is inserted in the player the right way up. - Check the condition of the CD: the CD cannot be played if it is too damaged. - Check the content in the case of a recorded CD: refer to the advice in the "AUDIO" section. - The audio system's CD player does not play DVDs. - Some recorded CDs will not be played by the audio system because they are not of the correct quality. The CD has been recorded in a format that is not compatible with the player (udf, ...). The CD is protected by an anti-pirating protection system which is not recognised by the audio system. There is a long waiting period following the insertion of a CD or connection of a USB memory stick. When a new medium is inserted, the system reads a certain amount of data (directory, title, artist, etc.). This may take from a few seconds to a few minutes. This phenomenon is normal. The CD player sound is poor. The CD used is scratched or of poor quality. Insert good quality CDs and store them in suitable conditions. The audio equipment settings (bass, treble, ambiences) are unsuitable. Set the treble or bass level to 0, without selecting an ambience.
FREQUENTLY ASKED QUESTIONS 273QUESTIONANSWERSOLUTION Some characters in the media information are not displayed correctly while playing. The audio system does not display some types of characters. Use standard characters to name tracks and folders. Playing of streaming fi les does not start. The peripheral device connected does not support automatic play. Start the playback from the device. The names of tracks and the track length are not displayed on the screen when streaming audio. The Bluetooth profi le does not allow the transfer of this information. Radio The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is displayed...). The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling. Activate the "RDS" function by means of the short-cut menu to enable the system to check whether there is a more powerful transmitter in the geographical area. The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode. This phenomenon is normal and does not indicate a fault with the audio system. The aerial is absent or has been damaged (for example when going through a car wash or into an underground car park). Have the aerial checked by a PEUGEOT dealer. I cannot fi nd some radio stations in the list of stations received. The station is not received or its name has changed in the list. Some radio stations send other information in place of their name (the title of the song for example). The system interprets this information as the name of the station. The name of the radio station changes.
FREQUENTLY ASKED QUESTIONS 274QUESTIONANSWERSOLUTIONSettings, confi guration In changing the setting of treble and bass the equalizer setting is deselected. The selection of an equalizer setting imposes the balance settings. Modifying one without the other is not possible. Modify the balance or equalizer settings to obtain the desired musical ambience. In changing the equalizer setting, treble and bass return to zero. When changing the balance settings, the distribution setting is deselected. The selection of a distribution setting imposes the balance settings. Modifying one without the other is not possible. Modify the balance or distribution settings to obtain the desired musical ambience. When changing an distribution setting, the balance setting is deselected. There is a difference in sound quality between the different audio sources (radio, CD...). For optimum sound quality, the audio settings for Volume, Bass, Treble, Equalizer and Loudness can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD...). Check that the audio settings for (Volume, Bass, Treble, Equalizer, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Fr-Re balance, Le-Ri balance) to the middle position, select the "None", musical ambience and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
FREQUENTLY ASKED QUESTIONS players. 275QUESTIONANSWERSOLUTION With the engine off, the system switches off after a few minutes of use. When the engine is switched off, the system's operating time depends on the battery charge. The switch-off is normal: the system switches to economy mode and switches off to prevent discharging of the vehicle's battery. Start the vehicle's engine to increase the battery charge. USB, portable player, connection key Playback of my USB memory stick starts only after a very long wait (around 2 to 3 minutes). Some fi les supplied with the memory stick may greatly slow down access to reading the memory stick (multiplication by 10 of the catalogue time). Delete the fi les supplied with the memory stick and limit the number of sub-folders in the fi le structure on the memory stick. When I connect my iPhone as telephone and to the USB port at the same time, I am unable to play the music fi les. When the iPhone connects automatically as a telephone, it forces the streaming function. The streaming function takes the place of the USB function which is then not useable, there is a period without sound of the track being played with Apple ® players. ®® Disconnect and reconnect to the USB port (the USB function takes priority over streaming).
276
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131