Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 2008 2013-2019 Owner's Manual Access Alarm

512Access System which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring: Alarm - Exterior perimeter The system checks for opening of the vehicle. The alarm is triggered if anyone tries to open a door, the boot, the bonnet... - Interior volumetric The system checks for any variation in the volume in the passenger compartment. The alarm is triggered if anyone breaks a window, enters the passenger compartment or moves inside the vehicle. Self-protection function The system checks for the putting out of service of its components. The alarm is triggered if the battery, the central control or the wires of the siren are put out of service or damaged. For all work on the alarm system, contact a PEUGEOT dealer or a qualified workshop. Locking the vehicle with full alarm system Activation Switch off the ignition and get out of the vehicle. Press the locking button on the remote control. After the locking button on the remote control is pressed, the exterior perimeter monitoring is activated after a delay of 5 seconds and the interior volumetric monitoring after a delay of 45 seconds. If an opening (door, boot...) is not closed fully, the vehicle is not locked but the exterior perimeter monitoring will be activated after a delay of 45 seconds at the same time as the interior volumetric monitoring. Press the unlocking button on the remote control. Deactivation The alarm system is deactivated: the indicator lamp in the button goes off. The monitoring system is active: the indicator lamp in the button flashes once per second.
52Access Locking the vehicle with exterior perimeter monitoring only Deactivate the interior volumetric monitoring to avoid unwanted triggering of the alarm in certain cases such as: - leaving a pet in the vehicle, - leaving a window partially open, - washing your vehicle. Deactivation of the interior volumetric monitoring Switch off the ignition. Within ten seconds, press the button until the indicator lamp is on continuously. Get out of the vehicle. Press the locking button on the remote control immediately. The exterior perimeter monitoring alone is activated: the indicator lamp in the button flashes once per second. Reactivation of the interior volumetric monitoring Triggering of the alarm This is indicated by sounding of the siren and flashing of the direction indicators for thirty seconds. The monitoring functions remain active until the alarm has been triggered eleven times in succession. Press the unlocking button on the remote control to deactivate the exterior perimeter monitoring. Press the locking button on the remote control to activate all the monitoring functions. The indicator lamp in the button again flashes once per second. When the vehicle is unlocked using the remote control, rapid flashing of the indicator lamp in the button informs you that the alarm was triggered during your absence. When the ignition is switched on, this flashing stops immediately. Failure of the remote control To deactivate the monitoring functions: Unlock the vehicle using the key in the driver's door lock. Open the door; the alarm is triggered. Switch on the ignition; the alarm stops. The indicator lamp in the button goes off. Locking the vehicle without activating the alarm Lock or deadlock the vehicle using the key in the driver's door lock. Malfunction When the ignition is switched on, fixed illumination of the indicator lamp in the button indicates a malfunction of the system. Have it checked by a PEUGEOT dealer or a qualified workshop. * According to country. Automatic activation * 2 minutes after the last door or the boot is closed, the system is activated automatically. To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control. To be effective, this deactivation must be carried out each time the ignition is switched off.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131